| 1. |
ADAMASZEK Krzysztof |
BOSMAL Automotive Research and Development Institute Ltd., Bielsko-Biala, Poland, EU |
| Influence of Alloy Elements on Corrosion of Valve Steels in Environment of Combustion Gases of Self-Ignition Engine - POSTER |
| Co-authors: NOWAK Jan |
| 2. |
ADIGUZEL Osman |
Firat University , Elazig, Turkey |
| Nanoscale Characterization of Martensite Structures in Copper Based Shape Memory Alloys - POSTER |
| 3. |
AIŠMAN David |
University of West Bohemia, Plzeň, Czech Republic, EU |
| Development of Mechanical Properties and Microstructure of Thixoformed Powder Tool Steel |
| Co-authors: MAŠEK Bohuslav, JIRKOVÁ Hana, MIŠTEROVÁ Hedvika & WAGNER Martin |
| 4. |
AKCA Cem |
Yildiz Technical University, Istanbul, Turkey |
| Feasibility Study to Develop Magnesium-Based Materials to Produce Biomedical Implants and Appliances for Turkey |
| Co-authors: ERARSLAN Yaman |
| 5. |
AKSENOV Sergey |
Moscow State Institute of Electronics and Mathematics, Moskva, Russian Federation |
| Experimental Investigation of Ti-Al-V Alloy Superplastic Behavior |
| Co-authors: CHUMACHENKO Evgeniy & LOGASHINA Irina |
| 6. |
ALTUNCU Ekrem |
Kocaeli University, Kocaeli, Turkey |
| Adhesion Properties of The Plasma Spray Coatings |
| Co-authors: USTEL Fatih |
| 7. |
ANDRŠOVÁ Zuzana |
Technical university of Liberec, Liberec, Czech Republic, EU |
| NDT Detection of Decarburization during the ADI´s Heat Treatment - POSTER |
| Co-authors: SKRBEK Břetislav |
| 8. |
ANIKEEV Andrey |
South Ural State University, Chelyabinsk, Russian Federation |
| Investigation of the Effect of Heat Treatment on the Formation of Tungsten Carbide in a Gradient Composite Material - POSTER |
| 9. |
ANISIMOV Evgeniy |
CTU in Prague, Praha, Czech Republic, EU |
| The Effect of Deep Cryogenic Treatment on Wear and Corrosion Resistance of Titanium and its Alloy Ti 6Al 4V - POSTER |
| Co-authors: PEŠLOVÁ Františka & FAJNOR Pavol |
| 10. |
ARGENTERO Stefano |
Centro Sviluppo Materiali S.p.A., Rome, Italy, EU |
| Accumulative Roll Bonding Technology of Aluminium Alloys |
| 11. |
ASTAKHOV Alexandr |
Lipetsk State Technical University, Lipetsk, Russian Federation |
| Grinding Working Rolls of Hot Rolling Mills |
| Co-authors: KAWALEK Anna & MAZUR Igor |
| 12. |
ATAPEK S. Hakan |
Kocaeli University, Kocaeli, Turkey |
| Characterization of Microstructure and Fracture Behavior of GG20 and GG25 Cast Iron Materials Used in Valves |
| Co-authors: TASLICUKUR Z., ALTUG G. S., POLAT Ş. & TÜREDI E. |
| 13. |
ATAPEK Ş.Hakan |
Kocaeli Universitesi, Kocaeli, Turkey |
| Modelling and Thermal Analysis of Solidification in a Low Alloyed Steel - POSTER |
| Co-authors: ERIŞIR Ersoy & GÜMÜŞ Serap |
| 14. |
BAKALARCZYK Sebastian |
Technical University of Łodz, Lodz, Poland, EU |
| Innovation Management in Metallurgical Enterprises |
| 15. |
BAKALARCZYK Sebastian |
Technical University of Łodz, Lodz, Poland, EU |
| Risk of Economic Activity of Metallurgical Industry Enterprises - POSTER |
| Co-authors: GRADZKI Ryszard |
| 16. |
BAKOŠOVÁ Dana |
Trencin University of Alexander Dubcek in Puchov, Púchov, Slovakia, EU |
| AFM Analysis of Copper Alloys |
| 17. |
BALÁŽOVÁ Mariana |
Welding Research Institute - Industrial Institute of SR, Bratislava 3, Slovakia, EU |
| Formability Evaluation of Bimetal Using Physical Simulation |
| Co-authors: KLENOTIČOVÁ Anna, BÍLIK Jozef, HRNČIAR Viliam & BRZIAK Peter |
| 18. |
BALCAR Martin |
ŽĎAS, a.s., Ždár nad Sázavou, Czech Republic, EU |
| Production and Properties of Duplex Stainless Steel Forgings |
| Co-authors: SOCHOR Libor, NOVÁK Jaroslav. MARTÍNEK Ludvík, FILA Pavel, SVATOŇ Josef, TURECKÝ Václav, MARTÍNEK Petr, PODANÝ Pavel |
| 19. |
BARTOCHA Dariusz |
Politechnika Śląska, Gliwice, Poland, EU |
| Metallurgical and Chemical Quality of Low-Alloy Constructional Cast Steel vs. Mechanical Properties |
| Co-authors: KILARSKI Jerzy,SUCHOŃ Jacek, BARON Czesław, SZAJNAR Jan, JANERKA Krzysztof & SEBZDA Wojciech |
| 20. |
BEDNÁŘOVÁ Vlasta |
VSB - Technical University, Ostrava, Czech Republic, EU |
| Characterisation of Cellular Metallic Materials Manufactured by Casting Methods |
| Co-authors: LICHÝ Petr & HANUŠ Aleš |
| 21. |
BELAYEV Igor |
A. A. Baikov Institute of Metallurgy and Materials Science RAS, Moscow, Russian Federation |
| Temperature-Time Melting Conditions for a YuNDKT5BA Magnetic Alloy Prepared from a Rated Charge of a Given Composition - POSTER |
| Co-authors: ZORINA Elena, GRIGOROVICH K. V. & KOLCHUGINA N. B. |
| 22. |
BELAYEV Igor |
Vladimir State University, Vladimir, Russian Federation |
| Phase Composition and Service Properties of Refractory Ceramic Moulds for Single Crystal Growing - POSTER |
| Co-authors: STEPNOV A.A., KUTEPOV A.V. & KOLCHUGINA N.B. |
| 23. |
BELKESSA Brahim |
Scientific Research Center of Welding and Control, Cheraga, Algiers, Algeria |
| Mechanical and Structural Characterization of Dissimilar Welds between Duplex and Martensitic Stainless Steel - POSTER |
| Co-authors: SAHRAOUI Tahar & BADJI Riad |
| 24. |
BENACHOUR Mustapha |
University of Tlemcen, Tlemcen, Algeria |
| Effect of Plastic Pre-Deformation on Pipeline Steel on Fatigue Behavior - POSTER |
| Co-authors: BENACHOUR Nadjia, BENGUEDIAB Mohaed & HADJOUIi Féthi |
| 25. |
BENLAMNOUAR Mohamed Farid |
Scientific Research Centre in Welding and Control (CSC), Cheraga, Algeria |
| The Influence of Relaxation Treatments on Residual Stresses in Welded Pipe API 5L-X70 - POSTER |
| Co-authors: BADJI Riad, HADJI Mohamed |
| 26. |
BESTA Petr |
VSB - Technical University, Ostrava, Czech Republic, EU |
| Application of Total Productive Maintenance principles in metallurgical processes - POSTER |
| Co-authors: VOZŇÁKOVÁ Iveta, VILAMOVÁ Šárka, ŠVECOVÁ Eva, STOCH Milan |
| 27. |
BESTA Petr |
VSB - Technical University, Ostrava, Czech Republic, EU |
| Negative Elements in Blast Furnace Process - POSTER |
| Co-authors: JANOVSKÁ Kamila, HAVERLAND Jindřich |
| 28. |
BÍLEK David |
Technical University in Liberec, Liberec, Czech Republic, EU |
| Non-Destructive Diagnostic of Decarbonization Files of Steels - POSTER |
| Co-authors: SKRBEK Břetislav & PETERA Martin |
| 29. |
BIRUKOV Alexey |
Donetsk national technical university, Donetsk, Ukraine |
| Furnace Aggregates Instant Heat Balances Control |
| 30. |
BOHOVIČOVÁ Jana |
Slovak University of Technology, Bratislava, Slovakia, EU |
| Coating OF Tool Steels with CrN Enriched with Silver |
| Co-authors: KRUM Stanislav, HUDÁKOVÁ Mária & JURČI Peter |
| 31. |
BORISOV Sergey |
Lipetsk State Technical University, Lipetsk, Russian Federation |
| HSLA Steel Hardening in the Process of Cold Rolling - POSTER |
| Co-authors: MAZUR Igor P. |
| 32. |
BOUTASSOUNA Djamal |
University of Laghouat, Laghouat, Algeria |
| AES Analysis of Sulfur Grain Boundary Equilibrium Segregation in Nickel with Small Bulk Content in Sulfur - POSTER |
| Co-authors: Le GALL René & LEFKAIER Ibn Khaldoun |
| 33. |
BRANSKÁ Lenka |
University of Pardubice, Pardubice, Czech Republic, EU |
| Modification of Packaging Management in a Company as a Result of Involvement in a Value Network |
| Co-authors: PECINOVÁ Zuzana |
| 34. |
BROŽEK Vlastimil |
ICT in Prague, Praha, Czech Republic, EU |
| Improving Bond Strenght between Carbon Steel and Plasma Sprayed Ceramics by Phosphating Process |
| Co-authors: POKORNÝ Petr & MASTNÝ Libor |
| 35. |
BRUMEK Jan |
VSB - Technical University, Ostrava, Czech Republic, EU |
| Fatigue Crack Growth under Mixed Mode Loading of 18CrMo4 Steel |
| Co-authors: UMEZAWA Osamu, MAREŠ Vratislav |
| 36. |
BRYKSÍ STUNOVÁ Barbora |
CTU in Prague, Praha, Czech Republic, EU |
| Effect of Strontium on the Structure of Non-Binary Casting Alloy Al-Si - POSTER |
| 37. |
BRZÓSKA Jan |
Silesian University of Technology, Gliwice, Poland, EU |
| Dynamics of the Servicing and Trading Business Model Related to Metallurgical Products Versus the Growth of its Effectiveness and Value |
| 38. |
BŘUSKA Marek |
VSB - Technical University, Ostrava, Czech Republic, EU |
| Influence of Remelting Repeated on the Mechanical Properties and Structure of Alloys RR.350 - POSTER |
| Co-authors: LICHÝ Petr, BEŇO Jaroslav & CAGALA Michal |
| 39. |
BUČEK Pavol |
ŽP VVC s.r.o., Podbrezová, Slovakia, EU |
| Modeling and Control of Temperature Field of Continuously Cast Billet as Distributed Parameter System |
| Co-authors: TKÁČ Lukáš, ONDREJČKOVIČ Karol & HULKÓ Gabriel |
| 40. |
BUNDA Zbyněk |
University of West Bohemia, Plzeň, Czech Republic, EU |
| Evaluation of Residual Lifetime of Power Plant Parts |
| 41. |
BURCHART-KOROL Dorota |
Central Mining Institute, Katowice, Poland, EU |
| Fossil Fuels Consumption Evaluation in Blast Furnace Technology Based on Different Life Cycle Impact Assessment Methods |
| 42. |
BYSTRIANSKÝ Jaroslav |
ICT Prague, Praha 6, Czech Republic, EU |
| Assessment of High-Alloyed Refractory Materials |
| Co-authors: MATĚJKOVÁ Petra, PŘIKASKÝ Martin & ŠEFL Václav |
| 43. |
BYSTRIANSKÝ Jaroslav |
ICT Prague, Praha 6, Czech Republic, EU |
| Hydrogen Impact of High-Strength Steels Embrittlement |
| Co-authors: ŠEFL Václav, RAPOUCH Jiří, HORSÁK Lukáš, PŘÍKASKÝ Martin |
| 44. |
BYSTRIANSKÝ Jaroslav |
ICT Prague, Praha 6, Czech Republic, EU |
| Various Demonstrations of Hydrogen-Induced Damage to Steel - POSTER |
| 45. |
CAGALA Michal |
VSB - Technical University, Ostrava, Czech Republic, EU |
| Plasticity of Two High Manganese Steels with Different Ni and Cu Additions - POSTER |
| Co-authors: MAZANCOVÁ Eva, PŘÍKASKÝ Martin, LICHÝ Petr & BLAHOŽOVÁ Hana |
| 46. |
CIESLAR Miroslav |
Charles University in Prague, Praha, Czech Republic, EU |
| In-situ Electron Microscopy Observations of the Microstructure Changes in the 6082 Aluminium Alloy during Homogenization |
| Co-authors: BAJER Jan, HÁJEK Michal & OČENÁŠEK Vladivoj |
| 47. |
CIUBOTARIU Costel Relu |
Politehnica University of Timisoara, Timisoara, Romania, EU |
| New Structural and Morphological Properties of Thermally Sprayed Stellite Coatings after Laser Remelting - POSTER |
| Co-authors: MARGINEAN Gabriela |
| 48. |
CORNEA Florin-Marian |
“Politehnica” University of Timisoara, Timisoara, Romania, EU |
| Influence of Chemical Composition on the Mechanical Properties of Amorphous Alloys Produced in Ribbons Form - POSTER |
| Co-authors: SERBAN Viorel-Aurel, CODREAN Cosmin, BUZDUGAN Dragos & MELCIOIU Georgiana |
| 49. |
CRISTEA Lidia |
Romanian University of Science and Arts, Bucharest, Romania, EU |
| The Growth of the Quality Properties of the Alloys from the Ti-Mn (OT-4) System in the Elaboration Process - POSTER |
| Co-authors: CRISTEA Enona |
| 50. |
CUTEAN Simona Elena |
UPT, Timisoara, Romania, EU |
| HVOF Spraying Technique of Titanium on Steels Surfaces Components |
| Co-authors: ROSU Radu Alexandru & MITELEA Ion |
| 51. |
ČÁMSKÁ Dagmar |
University of Economics, Praha, Czech Republic, EU |
| Companies Related to the Metallurgical Production and Their Financial Health |
| Co-authors: HÁJEK Jiří, BOBEK Michal & KULA David |
| 52. |
ČAPEK Jaroslav |
ICT in Prague, Praha, Czech Republic, EU |
| Preparation of the NiTi Alloy by a Powder Metallurgy Technique |
| Co-authors: VOJTĚCH Dalibor & NOVÁK Pavel |
| 53. |
ČEGAN Tomáš |
VSB - Technical University, Ostrava, Czech Republic, EU |
| Effect of Yttrium on Oxygen Content and Microstructure of Ti-Al Intermetallics - POSTER |
| Co-authors: KURSA Miroslav, KONEČNÁ Kateřina, SMETANA Bedřich, ZLÁ Simona |
| 54. |
ČEGAN Tomáš |
VSB - Technical University, Ostrava, Czech Republic, EU |
| Effect of Annealing on Microstructure and Properties of Yttrium Alloyed Intermetallics Ti-47Al - POSTER |
| Co-authors: KURSA Miroslav, KONEČNÁ Kateřina & PETLÁK Daniel |
| 55. |
ČELKO Ladislav |
Brno University of Technology, Brno, Czech Republic, EU |
| Structural Stability of Thermal Barrier Cotings Produced by Thermal Spraying |
| Co-authors: KLAKURKOVÁ Lenka, SLÁMEČKA Karel, POSPÍŠILOVÁ Simona, JULIŠ Martin, NĚMEC Karel, PODRÁBSKÝ Tomáš & ŠVEJCAR Jiří |
| 56. |
ČERMÁK Jiří |
IPM ASCR, v. v. i., Brno, Czech Republic, EU |
| Improvement of Hydrogen Desorption Characteristics of Eutectic Mg/Mg2NiH4 and Mg2NiH4 by In Addition - POSTER |
| Co-authors: KRÁL Lubomír |
| 57. |
ČERMÁK Jiří |
IPM AS CR, v.v.i, Brno, Czech Republic, EU |
| Hydrogen Storage Capacity of Mg/Mg2Ni Eutectic Doped with Elements from Groups XIII and XIV - POSTER |
| Co-authors: KRÁL Lubomír |
| 58. |
ČERNÝ Ivo |
SVÚM a.s., Praha, Czech Republic, EU |
| Evaluation of Fatigue Strength of 42SiCr Steel Heat Treated by Advanced Process Considering Hardness Scatter and Content of Inclusions |
| Co-authors: MIKULOVÁ Dagmar, ČIPERA Martin & SÍS Jiří |
| 59. |
DÁM Karel |
ICT in Prague, Praha, Czech Republic, EU |
| Ultra-Fine Grained Al-Mg-Sc Based Alloys Studied by In-Situ Transmission Electron Microscopy |
| Co-authors: LEJČEK Pavel |
| 60. |
DAVID Jiří |
VSB - Technical University, Ostrava-Poruba, Czech Republic, EU |
| Control of Dependability of Metallurgical Processes Such as Logistics Chains |
| Co-authors: JANČÍKOVÁ Zora, VROŽINA Milan & NOVÁKOVÁ Helena |
| 61. |
DIGIANFRANCESCO Augusto |
Centro Sviluppo Materiali, Rome, Italy, EU |
| Long Term Microstructural Evolution of 9-12%Cr Steel Grades for Steam Power Generation Plants |
| Co-authors: TIBERI VIPRAIO S. & VENDITTI D.i |
| 62. |
DIMIAN Marcela Elena |
University “Politehnica” of Timişoara, Timisoara, Romania, EU |
| Cavitation Erosion Behavior of Heat Treated Ti-6Al-4V Alloy - POSTER |
| Co-authors: MITELEA Ion & BORDEASU Ilare |
| 63. |
DJAMA Mustapha |
C.S.C., Algiers, Algeria |
| Controlling the Integrity of Pipelines Against Corrosion Using a Monitoring Interface - POSTER |
| Co-authors: BENCHERIF Mouhamed |
| 64. |
DJEMA Mohamed Amine |
University of Boumerdes, Boumerdes, Algeria |
| Effect of Vibro-Impact Strengthening on the Fatigue Strength of Metallic Surfaces - POSTER |
| Co-authors: HAMOUDA Khaled, BABICHEV Anatoly, SAIDI Djamel & HALIMI Djamel |
| 65. |
DLOUHÝ Jaromír |
COMTES FHT a.s., Dobřany, Czech Republic, EU |
| Accelerated Carbide Spheroidisation (ASR) in Low-Alloyed Steels |
| Co-authors: HAUSEROVÁ Daniela & NOVÝ Zbyšek |
| 66. |
DLUHOŠ Jiří |
TESCAN, a.s., Brno, Czech Republic, EU |
| Application of Electron Channeliing Contrast Imaging in Study of Polycrystalline Materials and Visualization of Crystal Lattice Deffects - POSTER |
| Co-authors: MAN Jiří & SEDLÁČEK Libor |
| 67. |
DOBRA Ramona Monica |
Politehnica University of Timisoara, Timisoara, Romania, EU |
| Corrosion Performance of Duplex Treatments Based on Gas Nitriding and Shot Peening |
| Co-authors: MITELEA Ion & BOBINA Marian |
| 68. |
DOBROVSKÁ Jana |
VSB - Technical University, Ostrava, Czech Republic, EU |
| Investigation into Segregation of Selected Elements in the Breakout Area of a Continuously Cast Steel Slab |
| Co-authors: FRANCOVÁ Hana, DOBROVSKÁ Věra, KAVIČKA František & STRÁNSKÝ Karel |
| 69. |
DRÁPALA Jaromír |
VSB - Technical University, Ostrava, Czech Republic, EU |
| Our Activities in the Regional Materials Science and Technology Centre |
| Co-authors: KURSA Miroslav, GREGER Miroslav, SZURMAN Ivo, BROŽOVÁ Silvie, MALCHARCZIKOVÁ Jitka, PETLÁK Daniel, NÉTEK Václav, NOGA Zdeněk, MADAJ Michal & POHLUDKA Martin |
| 70. |
DRÁPALA Jaromír |
VSB - Technical University, Ostrava, Czech Republic, EU |
| New Types of Lead-Free Solders and their Properties - POSTER |
| Co-authors: PETLÁK Daniel, MALCHARCZIKOVÁ Jitka, VODÁREK Vlastimil, KONEČNÁ Kateřina, SMETANA Bedřich, ZLÁ Simona, KOSTIUKOVÁ Gabriela, MUSIOL Jan, SEIDLEROVÁ Jana, LASEK Stanislav, MADAJ Michal, KROUPA Aleš, URBÁNEK Jan, DUŠEK Karel, SEDLÁČEK Josef & SIDOROV Valerij E. |
| 71. |
DROBEČEK Jan |
Technical University of Liberec, Liberec, Czech Republic, EU |
| Corrosion Resistance of Heat-Resistance Alloys in Molten Lead Crystal at 1200°C - POSTER |
| Co-authors: HOTAŘ Adam & HOTAŘ Vlastimil |
| 72. |
DUDEK Rostislav |
VSB - Technical University, Ostrava, Czech Republic, EU |
| Possibilities of Experimental Study of Oxidic Melts Viscosity |
| Co-authors: ROSYPALOVÁ Silvie & DOBROVSKÝ Ľudovít |
| 73. |
DUCHEK Michal |
COMTES FHT a.s., Dobřany, Czech Republic, EU |
| Development of Modified Versions of 1.2343 Tool Steel |
| Co-authors: ŠUCHMANN Pavel, KREJČÍK Jiří, REŽNAR & MAREK Roman |
| 74. |
DUMONT Alice |
Centre des Matériaux, Evry, France, EU |
| Investigation of Heat Treatment Parameters Effect on the Microstructure and on the Mechanical Properties of a Powder Metallurgy Nickel-Base Superalloy |
| Co-authors: NAZÉ Loïc, KÖSTER Alain, RÉMY Luc, GUÉDOU Jean-Yves & FRANCHET Jean-Michel |
| 75. |
DUONG Van Yen |
Institute of Weapons, Hanoi, Viet Nam |
| Exploding Experiment for Evaluation of Physical-Mechanical Characteristics of Metallic Materials - POSTER |
| Co-authors: NGUYEN Quang Thuan & HOANG Nguyen Khoi |
| 76. |
DUPÁK Libor |
ISI AS CR, v.v.i., Brno, Czech Republic, EU |
| Dynamic Impact Wear Test of Hard Coatings - POSTER |
| Co-authors: FOŘT Tomáš, GROSSMAN Jan, SOBOTA Jaroslav |
| 77. |
ĎURČÍK Roman |
ŽP VVC Ltd., Podbrezová, Slovakia, EU |
| Simulation of Tube Rolling by Push Bench Process - POSTER |
| Co-authors: PARILÁK Ľudovít |
| 78. |
DVOŘÁK Jiří |
IPM AS CR, v.v.i., Brno, Czech Republic, EU |
| Microstructure Stability and Creep Behaviour of Alloys Processed by ECAP |
| Co-authors: KRÁL Petr, SVOBODA Milan, KVAPILOVÁ Marie & SKLENIČKA Václav |
| 79. |
ELIÁŠOVÁ Ivana |
University of West Bohemia, Plzeň, Czech Republic, EU |
| The Influence of the Temperature of the Processing on the Final Structure of the Metal-Ceramic Compact Obtained through the Semi-Solid State |
| Co-authors: MAŠEK Bohuslav, KUSÝ Martin, SVOBODA Jiří & JIRKOVÁ Hana |
| 80. |
ERARSLAN Yaman |
Yildiz Technical University, Istanbul, Turkey |
| Effect of Deformation Strain and Hardenability of Homogenization Process on Al-6063 Alloy |
| Co-authors: AKCA Cem |
| 81. |
ERIŞIR Ersoy |
Kocaeli Universitesi, Kocaeli, Turkey |
| Strain Induced Precipitation in Microalloyed Steels Containing Nb, Ti and V |
| 82. |
FABÍK Richard |
VSB - Technical University, Ostrava, Czech Republic, EU |
| Mathematical Modeling of Influence Drawing Parameters on Strain Uniformity across Wire Cross Section - POSTER |
| Co-authors: HALFAROVÁ Petra & KUČERA Tomáš |
| 83. |
FABÍK Richard |
VSB - Technical University, Ostrava, Czech Republic, EU |
| Mathematical Modelling of Cooling and Prediction of Mechanical Properties of Shapes after Hot Rolling - POSTER |
| Co-authors: BARON Richard, KAWULOK Petr |
| 84. |
FALTUS Jiří |
VUK Panenske Brezany, a.s., Praha, Czech Republic, EU |
| Influence of Corrosion on Fatigue Properties of Aluminium Alloys AA6082, AA6262 a AA6023 |
| Co-authors: VRÁTNÁ Jitka |
| 85. |
FELIKS Jerzy |
AGH University of Science and Technology, Krakow, Poland, EU |
| Dependability Based Concept of Supply Chain Resilience with the Example of Supply of Iron Ore for the Steel Industry |
| Co-authors: BUKOWSKI Lech |
| 86. |
FILA Pavel |
ŽĎAS, a.s., Žďár nad Sázavou, Czech Republic, EU |
| Intensification of the EAF melting process in electric steelworks in ŽĎAS, Inc. |
| Co-authors: SUCHY Oldřich, BALCAR Martin, MARTÍNEK Ludvík & BRHEL Jaroslav |
| 87. |
FOGAGNOLO João Batista |
State University of Campinas, Campinas, Brazil |
| The Effect of the Laser Process Parameters in the Microstructure and Mechanical Properties of Ti6Al4V Produced by Selective Laser Sintering/Melting |
| Co-authors: SALLICA-LEVA Edwin, LOPES Eder, JARDINI André & CARAM Rubens |
| 88. |
FOJT Jaroslav |
ICT Prague, Praha, Czech Republic, EU |
| Corrosion Behaviour of Ti-39Nb Alloy Prepared by Powder Metallurgy |
| Co-authors: JOSKA Luděk & HNILICA František |
| 89. |
FORET Rudolf |
Brno University of Technology, Brno, Czech Republic, EU |
| Redistribution of Carbon and Nitrogen in Heterogeneous Weld Joints of Creep-Resistant Steels (P91/P22) |
| 90. |
FRANC Aleš |
University of West Bohemia, Plzeň, Czech Republic, EU |
| The Influence of Thermal Load on Properties of Heterogeneous Joints between Steel and Aluminium Alloy |
| Co-authors: TESAŘ Jiří |
| 91. |
FRISCHER Robert |
VSB - Technical University, Ostrava, Czech Republic, EU |
| Application of Wireless Identification Technology for Support Control in Steel Works |
| Co-authors: DAVID Jiří, STRAŇAVOVÁ Mária |
| 92. |
FRKÁŇOVÁ Katarína |
IMMM SAS, Trnava, Slovakia, EU |
| Relationship Between Microstructure and Cooling Rate in Air-Hardenable TiAl-Based Alloy |
| Co-authors: LAPIN Juraj |
| 93. |
GAUDE-FUGAROLAS Daniel |
Independent Research in Physical Metallurgy and Engineering, Vilassar de Mar, Spain, EU |
| Interaction of Prior Deformation and Heating Rate on Austenitisation Kinetics - POSTER |
| 94. |
GOLI-OGLU Eugene |
I.P. Bardin Central Research Institute for Ferrous Metallurgy, Moscow, Russian Federation |
| Features of Structure Formation of Hot-Deformed Austenite, the Final Microstructure and Properties of Low Carbon Microalloyed Steel by Thermomechanical Processing - POSTER |
| Co-authors: EFRON Leonid & MOROZOV Uriy |
| 95. |
GONCHAROV Anton |
LSTU, Lipetsk, Russian Federation |
| About the Accuracy of Hot- Rolled Strips‘ Cross-Section Measured Profiles Approximation with a Second-Order Parabolic Curve |
| Co-authors: BELSKIY Sergey |
| 96. |
GOSPODINOV Danail |
University of Ruse, Ruse, Bulgaria, EU |
| Some Specifics and Opportunities in Vacuum oil Quenching - POSTER |
| 97. |
GRAJCAR Adam |
Silesian University of Technology, Gliwice, Poland, EU |
| Effect of Thermomechanical Processing on a Retained Austenite Fraction in AHSS Containing 5%Mn |
| Co-authors: OPIELA Marek |
| 98. |
GREGER Miroslav |
VSB - Technical University, Ostrava, Czech Republic, EU |
| New Technology Forged Heavy Crankshafts |
| Co-authors: PETRŹELA Jiří, LÁSZLÓ Vladimír, JUHAS Miroslav & CECHEL Tomáš |
| 99. |
GREGER Miroslav |
VSB - Technical University, Ostrava, Czech Republic, EU |
| Mechanical Properties Forged Pieces from Magnesium Alloys and its Utilization in Industry - POSTER |
| Co-authors: SNÁŠEL Václav & MAŠEK Václav |
| 100. |
GREGER Miroslav |
VSB - Technical University, Ostrava, Czech Republic, EU |
| Structure and Properties of Dental Implants - POSTER |
| Co-authors: WIDOMSKÁ Milena |
| 101. |
GROZA Cosmin |
"Politehnica" University of Timisoara, Timisoara, Romania, EU |
| Melted Zone Morphology by Laser Welding of Ti-6Al-4V with X5CrNi18-10 - POSTER |
| Co-authors: MITELEA Ion, UTU Ion-Dragos |
| 102. |
GRYC Karel |
VSB - Technical University, Ostrava, Czech Republic, EU |
| High-Temperature Thermal Analysis of Specific Steel Grades |
| Co-authors: SMETANA Bedřich, ŽALUDOVÁ Monika, KLUS Petr, MICHALEK Karel, TKADLEČKOVÁ Markéta, DOBROVSKÁ Jana & SOCHA Ladislav |
| 103. |
GÜMÜŞ Serap |
Kocaeli University, Kocaeli, Turkey |
| Dilatometric Investigations of the Effect of Heat Treatment on the Microstructure of Hot Rolled Mining Support Profile |
| Co-authors: ERİŞİR Ersoy, ZEREN Muzaffer, KÖSE Günay, FINDIK Erkut |
| 104. |
GÜMÜŞ Serap |
Kocaeli University, Kocaeli, Turkey |
| Microstructural Characterization of Carbides in a Cast High Speed Steel using Different Metallographic Techniques - POSTER |
| Co-authors: ATAPEK Ş. Hakan, POLAT Şeyda, ERİŞİR Ersoy, ALKAN Attila |
| 105. |
GURO Vitaliy |
Institute of general & inorganic chemistry AS, Tashkent, Uzbekistan |
| Ammonium Perrhenate Purificiation and Rhenium Recovery from Heat-Resistant Rhenium-Nickel Superalloys - POSTER |
| 106. |
HAJDUGA Maciej Blazej |
University of Bielsko-Biala, Bielsko-Biala, Poland, EU |
| Analysis of Ceramic Implants Surface with Golden Nano-Layer |
| Co-authors: HAJDUGA Maciej & JEDRZEJCZYK Dariusz |
| 107. |
HAKEM Maamar |
C.S.C., Algiers, Algeria |
| Welding and Characterization of 5083 Aluminium Alloy - POSTER |
| Co-authors: LEBAILI S., MIROUD J., BENTALEB A. & TOUKALI S. |
| 108. |
HALFA Hossam |
Central Metallurgical R&D Ins, Cairo, Egypt |
| The Role of Production Technology and Nitrogen Addition on the Microstructure and the Corrosion Behaviors of High Speed Tool Steel M41 - POSTER |
| Co-authors: HANNAA B. Hassan |
| 109. |
HALFA Hossam |
Central Metallurgical R&D Ins, Cairo, Egypt |
| Innovative Method for Producing functionally Gradient Steel for High Corrosion Resistance Applications - POSTER |
| Co-authors: MAMDOUH Eissa |
| 110. |
HANUS Aleš |
VSB - Technical University, Ostrava, Czech Republic, EU |
| Production and Properties of Cast Metal with a Porous Structure - POSTER |
| Co-authors: LICHÝ Petr & BEDNÁŘOVÁ Vlasta |
| 111. |
HAUSEROVÁ Daniela |
COMTES FHT a.s., Dobřany, Czech Republic, EU |
| Accelerated Carbide Spheroidisation in 100CrMn6 Bearing Steel |
| Co-authors: DLOUHÝ Jaromír & NOVÝ Zbyšek |
| 112. |
HAVIERNIKOVÁ Katarína |
University of Alexander Dubcek in Trencin, Trenčín, Slovakia, EU |
| Selected Aspects of Clusters Initiatives in the Field of Industry in the Slovak republic - POSTER |
| 113. |
HAVLÍČEK Petr |
DT - Pointworks and Machineworks, Prostějov, Czech Republic, EU |
| Experience with Explosive Hardening of Railway Frogs from Hadfield Steel - POSTER |
| Co-authors: BUŠOVÁ Kateřina |
| 114. |
HILLMANN Carsten |
DK Recycling und Roheisen GmbH, Duisburg, Germany, EU |
| The DK Process - A Solution for the By-Products of the European Steel Industry |
| Co-authors: SASSEN Karl-Josef |
| 115. |
HNÍZDIL Milan |
Brno University of Technology, Brno, Czech Republic, EU |
| Influence of Water Temperature on the Cooling Intensity during Continuous Casting and Hot Rolling |
| Co-authors: RAUDENSKÝ Miroslav |
| 116. |
HORÁČEK Miroslav |
ISI AS CR, v.v.i., Brno, Czech Republic, EU |
| Thin Metallic Layers Structured by E-beam Lithography |
| Co-authors: KOLAŘÍK Vladimír, URBÁNEK Michal, MATĚJKA František & MATĚJKA Milan |
| 117. |
HORÁKOVÁ Veronika |
VSB - Technical University, Nanotechnology center, Ostrava, Czech Republic, EU |
| Hydraulic properties of ladle steel slags - POSTER |
| Co-authors: MATĚJKA Vlastimil, VLČEK Jozef & KUKUTSCHOVÁ Jana |
| 118. |
HORNÍK Jakub |
CTU in Prague, Praha, Czech Republic, EU |
| Evaluation of Properties of CrN PVD Coating for Functionally Graded Coatings |
| Co-authors: RYBNÍČEK Jan, RUND Martin, HÁJKOVÁ Pavlína & ANISIMOV Evgeniy |
| 119. |
HORSINKA Jaromír |
VSB - Technical University, Ostrava, Czech Republic, EU |
| Study of the Kinetics of Static Recrystallization Using Avrami Equation and Stress Relaxation Method |
| Co-authors: KLIBER Jiří, KNAPINSKI Marcin & MAMUZIC Ilija |
| 120. |
HOUDKOVÁ Šárka |
Research and Testing Institute Plzen, Plzeň, Czech Republic, EU |
| The Spraying Parameters Optimization of the HVOF Stellite 6 Coating |
| Co-authors: KAŠPAROVÁ Michaela & SCHUBERT Jan |
| 121. |
HRABOVSKÝ Jozef |
Brno University of Technology, Brno, Czech Republic, EU |
| Influence of the Water Chamber and Position of the Stabilizer on the Impact Pressure at High Pressure Descaling |
| Co-authors: HORSKÝ Jaroslav |
| 122. |
HRADILOVÁ Monika |
ICT In Prague., Praha, Czech Republic, EU |
| The Microstructure Development of Ca-Doped Mg–Zn Alloy During Hot Deformation |
| Co-authors: LEJČEK Pavel, DESRAYAUD Christopher, MONTHEILLET Frank & FRACZKIEWICZ Anna |
| 123. |
HRNČIARIKOVÁ Helena |
Trencin University of Alexander Dubcek in Puchov, Púchov, Slovakia, EU |
| Surface-Modified Austenitic Steel Used for the Thermal Mechanical Stress in the Glass Industry |
| Co-authors: TALAŠ Rastislav, ANISIMOV Evgeniy, PEŠLOVÁ Františka, VRÁBEL Peter |
| 124. |
HUDÁKOVÁ Mária |
STU, FMST in Trnava, Trnava, Slovakia, EU |
| Diffusion Boronizing of Cr-V Ledeburitic Steels |
| Co-authors: JURČI Peter & SEDLICKÁ Viktória |
| 125. |
CHERKASHINA Tatyana |
Lipetsk State Technical University, Lipetsk, Russian Federation |
| Investigation of the Rolling with Soft Reduction of Continuously Cast Billets |
| Co-authors: AKSENOV Sergey & KOSILOV Oleg |
| 126. |
CHOCHOLATÝ Ondřej |
University of West Bohemia, Plzeň, Czech Republic, EU |
| Comparison of Wear Resistance of Chromium Coatings for Piston Rings using Pin-on-disc Test and Engine Test |
| Co-authors: HÁJEK Jiří & KŘÍŽ Antonín |
| 127. |
CHUMACHENKO Evgeniy |
Moscow Institute of Electronics and Mathematics (Technical University), Moscow, Russian Federation |
| Optimization of Superplastic Forming Technology |
| Co-authors: AKSENOV Sergey & LOGASHINA Irina |
| 128. |
CHUMANOV Ilya |
South Urals State University, Chelyabinsk, Russian Federation |
| Investigation of Mechanical Properties of Metal-Ceramic Gradient Material at High Temperatures - POSTER |
| 129. |
JAGER Aleš |
IoP AS CR, v. v. i., Praha, Czech Republic, EU |
| Equal Channel Angular Pressing of Magnesium at Room Temperature: The Effect of Processing Route on Microstructure and Texture - POSTER |
| Co-authors: GARTNEROVÁ Viera & LEJČEK Pavel |
| 130. |
JAKÁBOVÁ Martina |
SUT, FMST in Trnava, Trnava, Slovakia, EU |
| Status of Customer Relationship Management in Slovakia |
| 131. |
JAN Vít |
Brno University of Technology, Brno, Czech Republic, EU |
| Preparation of Porous Intermetallics from Coldspray deposits - POSTER |
| Co-authors: ČÍŽEK Jan, KURKOVÁ Pavlína |
| 132. |
JANČÍK Petr |
VSB - Technical University, Ostrava, Czech Republic, EU |
| Impact of Metallurgical Industries on the Air Quality in the Moravian-Silesian Region - POSTER |
| Co-authors: PAVLÍKOVÁ Irena & BITTA Jan |
| 133. |
JANERKA Krzysztof |
Silesian University of Technology, Gliwice, Poland, EU |
| Heat up and Dissolution of Carburizers in Liquid Ferrous Alloys |
| Co-authors: BARTOCHA Dariusz, JEZIERSKI Jan & SZAJNAR Jan |
| 134. |
JANISZEWSKI Krystian |
Silesian University of Technology, Katowice, Poland, EU |
| Change of Slenderness of Multi-Hole Ceramic Filters from = 1,67 to = 3,34 as a factor determining the Effectiveness of Steel Filtration Process - POSTER |
| Co-authors: GRYC Karel & TKADLEČKOVÁ Markéta |
| 135. |
JANOVSKÁ Kamila |
VSB - Technical University, Ostrava, Czech Republic, EU |
| Optimization of the Tolling Project of Using the Methods of Network Analysis - POSTER |
| Co-authors: STANĚK Jiří, VILAMOVÁ Šárka, VOZŇÁKOVÁ Iveta & KUTAČ Josef |
| 136. |
JANSTO Steven |
CBMM-Reference Metals Company, Bridgeville, United States |
| Applied Metallurgy of the MicroNiobium Alloy Approach in Long and Plate Products |
| 137. |
JEDRZEJCZYK Dariusz |
University of Bielsko-Biala, Bielsko-Biala, Poland, EU |
| Influence of the Surface State on Hot Dip Zn Galvanizing Effects of Iron Alloys |
| Co-authors: SKOTNICKI Wojciech, WEGRZYNKIEWICZ Sylwia & HAJDUGA Maciej |
| 138. |
JEDRZEJCZYK Dariusz |
University of Bielsko-Biala, Bielsko-Biala, Poland, EU |
| Influence of Modifying Treatment of Titanic Implants on Periimplantitis - POSTER |
| Co-authors: ZDZIECH Tadeusz & HAJDUGA Maciej |
| 139. |
JENÍČEK Štěpán |
University of West Bohemia in Plzen, Plzeň, Czech Republic, EU |
| Determination of Material Characteristics of Dynamically Stressed High-Strength Steel - POSTER |
| Co-authors: MAŠEK Bohuslav |
| 140. |
JEZIERSKI Jan |
Silesian University of Technology, Gliwice, Poland, EU |
| Analysis of the Gas-Solid Jet in Pneumatic Powder Injection Process |
| Co-authors: JANERKA Krzysztof |
| 141. |
JIRKOVÁ Hana |
University of West Bohemia, Plzeň, Czech Republic, EU |
| The Effect of Advanced Thermomechanical Treatments on Mechanical Properties of Low Alloyed High Strength Steels |
| Co-authors: KUČEROVÁ Ludmila, PRUCHA Vojtěch & MAŠEK Bohuslav |
| 142. |
JONŠTA Petr |
VSB - Technical University, Ostrava, Czech Republic, EU |
| Evaluation of Duplex Steel Resistance to Sulfide Stress Cracking Using Tensile Test and Four-Point Bending Test |
| Co-authors: SOJKA Jaroslav, MATOCHA Karel, KONEČNÁ Kateřina & JONŠTA Zdeněk |
| 143. |
JOSKA Luděk |
ICT in Prague, Praha 6, Czech Republic, EU |
| Corrosion Behaviour of DLC-Ti Alloyed Coating for Implants |
| Co-authors: FOJT Jaroslav & CVRČEK Ladislav |
| 144. |
JURASZ Zbigniew |
Bosmal Automotive Research and Development Institute Ltd., Bielsko-Biała, Poland, EU |
| Corrrosion Resistance of Valv Steels in Combustion Gases of Fuel Oil with 5 and 10 % Bio-Components Additives - POSTER |
| Co-authors: ADAMASZEK Krzysztof |
| 145. |
JURČI Peter |
STU, FMT, Trnava, Slovakia, EU |
| Wear Resistance of Sub-Zero Processed Cr-V Ledeburitic Steel Vanadis 6 |
| Co-authors: JANKA Leo |
| 146. |
JURCHELA Alin Dan |
“Politehnica” University of Timisoara, Timisoara, Romania, EU |
| Considerations on the Effects of Carbon Content on the Cavitation Erosion Resistance of Stainless Steels with Controled Content of Chromium and Carbon - POSTER |
| Co-authors: BORDEASU Ilare, MITELEA Ion & KARABENCIOV Adrian |
| 147. |
JUŘICA Jan |
VSB - Technical University, Ostrava-Poruba, Czech Republic, EU |
| Microstructure of TiAl-Nb Alloys after Thermal Hydrogen Treatment - POSTER |
| Co-authors: LOSERTOVÁ Monika |
| 148. |
KAHOVEC Čestmír |
KOVOHUTĚ ROKYCANY, a. s., Praha, Czech Republic, EU |
| Industrial Development and Research of Modern Ni-Alloys for Sophisticated Application (including Production Technology) - POSTER |
| Co-authors: MACHÁČKOVÁ Kateřina, REŽNAR Jiří & FALTUS Jiří |
| 149. |
KARABENCIOV Adrian |
"Politehnica" University of Timisoara, Timisoara, Romania, EU |
| Considerations on the Cavitation Erosion Behavior of Two Stainless Steels with Similar Ratios of Structural Constituents - POSTER |
| Co-authors: BORDEASU Ilare, MITELEA Ion & JURCHELA Alin Dan |
| 150. |
KARDAS Edyta |
Czestochowa University of Technology, Czestochowa, Poland, EU |
| The Effect of Quality of Ferrous Burden Materials on the Quality of Pig Iron - POSTER |
| 151. |
KAŠPAROVÁ Michaela |
Research and Testing Institute Plzen, Plzeň, Czech Republic, EU |
| Thermally Sprayed Coatings for High-Temperature Application |
| Co-authors: HOUDKOVÁ Š. & SCHUBERT J. |
| 152. |
KATONA Stefan-Eusebiu |
"Politehnica" University of Timisoara, Timisoara, Romania, EU |
| Contribution Regarding the Behavior to Cavitation Erosion of Some Austenitic Stainless Steels - POSTER |
| Co-authors: BORDEASU Ilare & MITELEA Ion |
| 153. |
KAVIČKA František |
Brno University of Technology, Brno, Czech Republic, EU |
| Comparison of the Temperature Field Continuously Cast Steel Slabs of Different Chemical Composition |
| Co-authors: STRÁNSKÝ Karel, SEKANINA Bohumil, ŠTĚTINA Josef, MAUDER Tomáš, MASARIK Miloš |
| 154. |
KAWULOK Petr Ing. |
VSB - Technical University, Ostrava, Czech Republic, EU |
| Influence of Methodology for Acquiring and Processing of Experimental Data for Determination of the Value of Activation Energy at Hot forming |
| Co-authors: MENDROK Radek, SCHINDLER Ivo, RUSZ Stanislav & KNAPIŃSKI Marcin |
| 155. |
KEJZLAR Pavel |
Technical University of Liberec, Liberec, Czech Republic, EU |
| The Structure and High-Temperature Mechanical Properties of Fe-Al-Zr-Based Intermetallic Alloys |
| Co-authors: KRATOCHVÍL Petr & VODIČKOVÁ Věra |
| 156. |
KEKULE Tomáš |
Charles University in Prague, Praha, Czech Republic, EU |
| Effect of Heat Treatment on Phase Transformations in Mg-Y-(Nd)-Zn Alloys - POSTER |
| Co-authors: VLACH Martin, CÍSAŘOVÁ Hana, SMOLA Bohumil & STULÍKOVÁ Ivana |
| 157. |
KELLER Libor |
TSI System s.r.o., Brno, Czech Republic, EU |
| Measuring and Testing Technology for the Production and Processing of Metals - COMMERCIAL PRESENTATION |
| 158. |
KIMYASHOV Alexsander |
South-Ural state university, Chelyabinsk, Russian Federation |
| Phase Transformations During Oxidizing Roasting of Copper Sulphide Smelting Slag - POSTER |
| Co-authors: LYKASOV A.A., MATONIN A.N.& VERTIY I.G. |
| 159. |
KIRILLOVA Valentina |
A.A.Baikov Institute of Metallurgy and Materials Sciences RAS, Moscow, Russian Federation |
| The Synthesis of Nb- and Zr-Carbides and -Carbonitrides by the Plasma-Arc Method - POSTER |
| Co-authors: BURKHANOV G.S., SDOBYREV V.V., DEMENTEV V.A., SHVORNEVA L.I., KUZNETSOV K.B., KLIMAEV S.M. & DANKIN D.G. |
| 160. |
KLAPALOVÁ Alena |
Masaryk university, Brno, Czech Republic, EU |
| Strategic Management Factors of MNCs Subsidiaries - Comparative Analysis of Metal Manufacturing and Other Industries in the Czech Republic |
| 161. |
KLAPUT Pavel |
VSB - Technical University, Ostrava-Poruba, Czech Republic, EU |
| Influence of Used Method on the Results of Gage Repeatability and Reproducibility Study |
| Co-authors: PLURA Jiří |
| 162. |
KLAUS Pavel |
VSB - Technical University, Ostrava, Czech Republic, EU |
| Electrical Properties of Flame from Methane and Oxygen Mixture |
| Co-authors: TOMČÍK Petr & MOHYLA Petr |
| 163. |
KLIBER Jiří |
VSB - Technical University, Ostrava, Czech Republic, EU |
| Impact of Pulling Forces and Friction of Deformation Resistance in Cold Rolling |
| Co-authors: MIŠUREC Josef, MAMUZIC Ilija, HORSINKA Jaromír & JUŘÍČEK Zdeněk |
| 164. |
KLIBER Jiří |
VSB - Technical University, Ostrava, Czech Republic, EU |
| Metallographic Exploration of TWIP Steel - POSTER |
| Co-authors: KURSA Miroslav, DROZD Kamil, HAJDUCHOVÁ Ľuba & PEŠLOVÁ Františka |
| 165. |
KLIMEŠ Lubomír |
Brno University of Technology, Brno, Czech Republic, EU |
| Influence of Chemical Composition of Cast Steel on the Temperature Field of Continuously Cast Billets |
| Co-authors: ŠTĚTINA Josef, PARILÁK Ľudovít & BUČEK Pavol |
| 166. |
KLIMOVÁ Alena |
IMMM SAS, Bratislava, Slovakia, EU |
| Microsegregation Behaviour of the Alloying Elements in Directionally Solidified Intermetallic Ti-44Al-5Nb-0.2B-0.2C Alloy - POSTER |
| Co-authors: LAPIN Juraj |
| 167. |
KLUS Petr |
VSB - Technical University, Ostrava, Czech Republic, EU |
| Numerical Modelling of Metallurgical Processes - Casting and Solidification of Steel - POSTER |
| Co-authors: MICHALEK Karel & ŽALUDOVÁ Monika |
| 168. |
KNOTEK Vítězslav |
ICT in Prague, Praha, Czech Republic, EU |
| Influence of Ni and RE on Hydrogen Absorption by Mg-Based Alloys |
| Co-authors: VOJTĚCH Dalibor |
| 169. |
KODZHASPIROV Georgy |
St.Petersburg State Polytechnical University, St.Petersburg, Russian Federation |
| Structure Evolution and Mechanical Properties of Steel Deformed with Lärge Plastic Strains in Austenitic-Perlitic transformation Zone |
| Co-authors: RUDSKOY Andrey |
| 170. |
KOLAŘÍK Ladislav |
CTU in Prague, Praha, Czech Republic, EU |
| Influence of Repeated Repair Welding on Weld Quality of Precipitation Hardenable Al Alloy EN AW 6082-T6 - POSTER |
| Co-authors: KOLAŘÍKOVÁ Marie, KOVANDA Karel, VONDROUŠ Petr & DUNOVSKÝ Jiří |
| 171. |
KOLAŘÍK Vladimír |
ISI AS CR, v.v.i., Brno, Czech Republic, EU |
| Thin Metallic Layers Structured by E-beam Lithography |
| Co-authors: HORÁČEK Miroslav, URBÁNEK Michal, MATĚJKA František & MATĚJKA Milan |
| 172. |
KOLAŘÍK Vladimír |
ISI AS CR, v.v.i., Brno, Czech Republic, EU |
| Institute of Scientific Instrument: An Overview Presentation - COMMERCIAL PRESENTATION |
| Co-authors: SOBOTA Jaroslav, HORÁČEK Miroslav, FOŘT Tomáš, DUPÁK Libor, ZOBÁČ Martin, MRŇA Libor, MIKMEKOVÁ Šárka & MIKMEKOVÁ Eliška |
| 173. |
KOLAŘÍKOVÁ Marie |
CTU in Prague, Praha, Czech Republic, EU |
| Wear Resistance of Duplex Coated Cr-Mo-V Alloyed Steel - POSTER |
| Co-authors: SUCHÁNEK Jan |
| 174. |
KOLCHUGINA Natalia |
A. A. Baikov Institute of Metallurgy and Materials Science RAS, Moscow, Russian Federation |
| Role of Terbium Hydride Additions in the Formation of Microstructure and Magnetic Properties of Sintered Nd-Pr-Dy-Fe-B System Magnets |
| Co-authors: LUKIN Aleksandr A., SKOTNICOVÁ Kateřina, BURKHANOV Gennady S., KLYUEVA Natalia E. & DRULIS Henrik |
| 175. |
KONDRACKI Marcin |
Silesian University of Technology, Gliwice, Poland, EU |
| Studies of Transition Zone Phenomena for AlSi Matrix Composite Reinforced with Intermetallic Phases |
| Co-authors: CHOLEWA Mirosław |
| 176. |
KONEČNÁ Kateřina |
VSB - Technical University, Ostrava, Czech Republic, EU |
| Structural Phase Analysis of Nickel Superalloy MAR- M - 247 - POSTER |
| Co-authors: JONŠTA Zdeněk, JONŠTA Petr, GABČOVÁ Miriam & HRBÁČEK Karel |
| 177. |
KONSTANCIAK Anna |
Czestochowa University of Technology, Czestochowa, Poland, EU |
| The Behavior of Blast Furnace Coke at High Temperatures - POSTER |
| 178. |
KONSTANCIAK Manuela |
Czestochowa University of Technology, Czestochowa, Poland, EU |
| The Use of 3x3 Matrix to Evaluation of Ribbed Wire Manufacturing Technology |
| Co-authors: BORKOWSKI Stanisław, ULEWICZ Robert, SELEJDAK Jacek & KLIMECKA-TATAR Dorota |
| 179. |
KOPAŇÁKOVÁ Sylvie |
VSB - Technical University, Ostrava, Czech Republic, EU |
| Study of Influence Particle Size of Anticorrosive Pigments on Coating Adhesion to the Steel Substrate - POSTER |
| Co-authors: PODJUKLOVÁ Jitka, BÁRTEK Vratislav, HRABOVSKÁ Kamila, SUCHÁNKOVÁ Kateřina, ŠRUBAŘ Petr & LANÍK Tomáš |
| 180. |
KORBÁŠ Martin |
VÍTKOVICE HEAVY MACHINERY a.s., Ostrava, Czech Republic, EU |
| Sources of Hydrogen in Vacuum Caisson Equipment |
| Co-authors: RACLAVSKÝ Milan |
| 181. |
KORBÁŠ Martin |
VÍTKOVICE HEAVY MACHINERY a.s., Ostrava, Czech Republic, EU |
| Change of Quantity, Sizes and Chemical Composition of Inclusions during Treatment of Steel in EAF-LF-VD Equipment |
| Co-authors: RACLAVSKÝ Milan & ČAMEK Libor |
| 182. |
KORECKÝ Michal |
VSB - Technical University, Ostrava, Czech Republic, EU |
| Planning and Management of Investment and Technical Development Projects under Uncertainty |
| Co-authors: TRKOVSKÝ Václav & ROŽNOVSKÝ Lukáš |
| 183. |
KORCHUNOV Aleksey |
Magnitogorsk State Technical University, Magnitogorsk, Russian Federation |
| Formalization Control Algorithm of Carbonaceous Nanostructured Steels Structure and Properties with Indeterminate Nature of Material State Parameters |
| Co-authors: POLYAKOVA Marina |
| 184. |
KOTAS Milan |
Trinecke zelezarny, a.s., Třinec, Czech Republic, EU |
| Mathematical Analysis of the Results of Continuous Torsion Test of Vanadium Microalloyed Steel |
| Co-authors: GAJDZICA Tomáš, BOŘUTA Josef & ČMIEL Karel Milan |
| 185. |
KOVÁŘ Ladislav |
VSB - Technical University, Ostrava, Czech Republic, EU |
| Mathematical Simulation of Gaseous Media Flow Through Blowing Elements in Metallurgical Aggregates - POSTER |
| 186. |
KOVÁŘÍK Ondřej |
CTU in Prague, Praha, Czech Republic, EU |
| The Effect of Intersplat Porosity on Properties of W Deposits |
| Co-authors: SIEGL Jan |
| 187. |
KRÁL Lubomír |
IPM ASCR, v. v. i., Brno, Czech Republic, EU |
| Measurement of Carbon Diffusion Coefficient - Calibration of Sputter Depth |
| Co-authors: ČERMÁK Jiř |
| 188. |
KRÁL Petr |
IPM AS CR, v.v.i., Brno, Czech Republic, EU |
| Influence of Microstructure Instability on Creep Behaviour of UFG Pure Materials |
| Co-authors: DVOŘÁK Jiří, SVOBODA Milan & SKLENIČKA Václav |
| 189. |
KRAMARZ Marzena |
Politechnika Śląska, Zabrze, Poland, EU |
| Decoupling Point in Supply Network of Steel Products - Dynamics of Changes |
| Co-authors: KRAMARZ Włodzimierz |
| 190. |
KRAUS Libor |
Comtes FHT a.s., Dobřany, Czech Republic, EU |
| WBCMM - A New Model of Cooperation between Production and Research Area - COMMERCIAL PRESENTATION |
| Co-authors: NOVÝ Zbyšek & ŠUBA Jan |
| 191. |
KRAUS Martin |
VSB - Technical University, Ostrava, Czech Republic, EU |
| The Influence of Structure Changes on Some Qualities of High-Alloyed Materials in the Simulation of Long-Term Operating Conditions |
| Co-authors: BÍLEK Pavel & BYSTRIANSKÝ Jaroslav |
| 192. |
KRIVOLAPOVA Olga N. |
National University of Science and Technology «MISiS», Moscow, Russian Federation |
| Physico-Chemical Studies of Correlations of Impedance Parameters and Determination of the Characteristic Frequencies of the Test Signal of Lithium-Ion and Lithium-Polymer Batteries - POSTER |
| Co-authors: TARASOV Vadim P. & DUBININA Lyubov V. |
| 193. |
KUBÁSEK Jiří |
ICT in Prague, Praha, Czech Republic, EU |
| Zn-based Alloys as an Alternative Biodegradable Materials |
| Co-authors: VOJTĚCH Dalibor |
| 194. |
KUBÁSEK Jiří |
ICT in Prague, Praha, Czech Republic, EU |
| Properties of Binary and Ternary Magnesium Alloys Containing Gd, Nd, Zn or Y |
| Co-authors: VOJTĚCH Dalibor |
| 195. |
KULA David |
University of Economics, Praha, Czech Republic, EU |
| Impact of Financial Crisis on Profitability and Liquidity of Companies in Metallurgical Industry in the Czech Republic |
| Co-authors: BOBEK Michal, HÁJEK Jiří, ČÁMSKÁ Dagmar |
| 196. |
LAMPA Martin |
VŠB - Technical University, Ostrava, Czech Republic, EU |
| Computer Support for Process Optimization in Metallurgical Company - POSTER |
| Co-authors: SAMOLEJOVÁ Andrea |
| 197. |
LAPIN Juraj |
IMMM SAS, Bratislava, Slovakia, EU |
| Microstructure Degradation of Nickel Based Single Crystal Superalloy during Creep |
| Co-authors: GEBURA Marek |
| 198. |
LASEK Stanislav |
VSB - Technical University, Ostrava, Czech Republic, EU |
| Corrosion Resistance of NdFeB Magnet Type with Projective ZnAl Layer in Selected Environments |
| Co-authors: SKOTNICOVÁ Kateřina & KURSA Miroslav |
| 199. |
LENORT Radim |
VSB - Technical University, Ostrava, Czech Republic, EU |
| Design and Implementation of the Forged Pieces Production Planning and Control Concept Based on Production Lines - POSTER |
| Co-authors: KLEPEK Roman |
| 200. |
LEZHNEV Sergey |
Karaganda state industrial university, Temirtau, Kazakhstan |
| Mathematical Modeling o Equal-Channel Angled Drawing in Step Tool |
| Co-authors: NAIZABEKOV Abdrakhman |
| 201. |
LICHÝ Petr |
VSB - Technical University, Ostrava, Czech Republic, EU |
| Study of Mechanical Properties of Magnesium Alloy with the Addition of Strontium at Elevated Temperatures |
| Co-authors: CAGALA Michal, BEŇO Jaroslav & ŽÁČEK David |
| 202. |
LIMOOEI Mohammad Bagher |
Islamic Azad University, Amol, Iran, Islamic Republic of |
| Optimization of Properties and Structure with Addition of Titanium in Hadfield Steels |
| Co-authors: HOSSEINI Shabnam |
| 203. |
LINHART Václav |
SVÚM a.s., Praha, Czech Republic, EU |
| The Use of Some Surfacing Procedures for Increase of Fatigue Strength of Fretting Loaded Machinery Parts |
| Co-authors: ČIPERA Martin & MIKULOVÁ Dagmar |
| 204. |
LISOWSKA Renata |
Technical University of Lodz, Lodz, Poland, EU |
| Impact of EU Funds on Building the Innovation Potential of Poland’s Small and Medium Enterprises from the Metal and Machine-Building Industries - POSTER |
| Co-authors: STANISŁAWSKI Robert |
| 205. |
LOGASHINA Irina |
Moscow State Institute of Electronics and Mathematics (Technical University), Moscow, Russian Federation |
| Application of computer simulation to a problem of bearing industrial waste recycling - POSTER |
| Co-authors: AKSENOV Sergey & CHUMACHENKO Evgeniy |
| 206. |
LOSERTOVÁ Monika |
VSB - Technical University, Ostrava, Czech Republic, EU |
| Properties of Mg-Ni Based Alloys Prepared by Mechanical Alloying - POSTER |
| Co-authors: JUŘICA Jan, ŠTĚPÁN Petr, KONEČNÁ Kateřina & MATĚJKA Vlastimil |
| 207. |
LOŠŤÁKOVÁ Hana |
University of Pardubice, Pardubice, Czech Republic, EU |
| Perception of Attractiveness of Components of the Offer and Forms of Support to Repeat Purchases by E-shop Clients |
| Co-authors: ČURDOVÁ Markéta |
| 208. |
LUKYANOV Alexander |
Ufa State Aviation Technical University, Ufa, Russian Federation |
| Mechanical Properties and Fracture of Nanostructured TiNi Alloys during Tensile Tests at Various Temperatures |
| Co-authors: PROKOFIEV Egor & GUNDEROV Dmitry |
| 209. |
LUPTÁKOVÁ Natália |
University of Alexander Dubcek in Trencin, Púchov, Slovakia, EU |
| Impact Raw Material for Production Zinc Oxide in Retort Furnaces - POSTER |
| Co-authors: KEBÍSKOVÁ Jarmila, ANISIMOV Evgeniy, BENÁK Michal & PEŠLOVÁ Františka |
| 210. |
MACHÁČKOVÁ Kateřina |
KOVOHUTĚ ROKYCANY, a. s., Rokycany, Czech Republic, EU |
| Industrial Research and Development Technology of Prodicton of Bars Made from Ni and Cu Alloys - POSTER |
| Co-authors: PODANÝ Pavel, SVĚTLÁ Miroslava & SLÁMA Peter |
| 211. |
MACHOVČÁK Pavel |
VÍTKOVICE HEAVY MACHINERY a.s., Ostrava, Czech Republic, EU |
| Evaluation of Chemical Heterogenity of a 90-ton Forging Ingot |
| Co-authors: OPLER A., CARBOL Z., TREFIL A., MERTA K., ZAORAL J., TKADLEČKOVÁ M. & MICHALEK K. |
| 212. |
MACHUTA Jiří |
Technical university of Liberec, Liberec, Czech Republic, EU |
| The Determination of Coefficient Thermal Shrinkage Zinc Alloys |
| Co-authors: NOVÁ Iva |
| 213. |
MÁLEK Přemysl |
Charles University in Prague, Praha, Czech Republic, EU |
| High-Temperature Deformation of an ECAP Al-Mn-Based Alloy |
| Co-authors: CIESLAR Miroslav & SLÁMA Peter |
| 214. |
MÁLEK Jaroslav |
UJP PRAHA a.s., Praha, Czech Republic, EU |
| Beta Titanium Ti35Nb6Ta Alloy with Boron Adition |
| Co-authors: HNILICA František & VESELÝ Jaroslav |
| 215. |
MALCHARCZIKOVÁ Jitka |
VSB - Technical University, Ostrava, Czech Republic, EU |
| Evaluation of Structure Characteristics of Centrifugally Cast Alloy Based on Ni3Al |
| Co-authors: KAŇÁK David, MILATA Petr, KURSA Miroslav & POHLUDKA Martin |
| 216. |
MALINDŽÁK Dušan |
Technical University in Kosice, Košice, Slovakia, EU |
| New Approach to Push Furnaces Heating Optimization |
| Co-authors: STRAKA Martin & KOŠTIAL Imrich |
| 217. |
MAREK Martin |
VSB - Technical University, Ostrava, Czech Republic, EU |
| Optimization Magnetic Properties of the Pure Ferrum - Behanit, Material for Construction of the Magnetic Lenses of the Electron Microscopes, Innovative Research of Electron Microscopes - POSTER |
| Co-authors: PETLAK Daniel, RICHTER Zbyněk, HOLČÁKOVÁ Regina & REŽNAR Jiří |
| 218. |
MAREK Martin |
VSB - Technical University, Ostrava, Czech Republic, EU |
| Magnetic Properties of the Types Steels for Chambers of Electron Microscopes, Innovative Research of Electron Microscope - POSTER |
| Co-authors: PETLAK Daniel, RICHTER Zbyněk, HOLČÁKOVÁ Regina & REŽNAR Jiří |
| 219. |
MARKOV Oleg |
Donbas State Engineering Academy, Kramatorsk, Ukraine |
| Investigation of the New Technological Process of Forging Large Shafts without Upsetting |
| Co-authors: OLESHKO Victor & ZLIGOREV Vitilij |
| 220. |
MARKOVA-DENEVA Ivania |
University of Chemical Technology and Metallurgy, Sofia, Bulgaria, EU |
| Template synthesis of Cu and Cu-Sn nanoparticles using carbon foam as a support - POSTER |
| Co-authors: PETROV Tihomir & DENEV Ivan |
| 221. |
MASARIK Miloš |
EVRAZ VÍTKOVICE STEEL, a.s., Ostrava, Czech Republic, EU |
| Possibilities of Graphical Simulation of Technological Parameters on the Machine for Continuous Casting |
| Co-authors: FRANĚK Zdeněk & ČAMEK Libor |
| 222. |
MATĚJÍČEK Jiří |
IPP AS CR, Praha, Czech Republic, EU |
| Tungsten-steel Composites and FGMs Produced by Hot Pressing - POSTER |
| Co-authors: BOLDYRYEVA Hanna, BROŽEK Vlastimil, ČIŽMÁROVÁ Elena & PALA Zdeněk |
| 223. |
MATHESIUSOVÁ Renáta |
University of West Bohemia, Plzeň, Czech Republic, EU |
| The Differences in Quality of 18CrNiMo7-6 Steel and its Influences at Deformation after Carburizing |
| Co-authors: KŘÍŽ Antonín |
| 224. |
MAUDER Tomáš |
Brno university of technology, Brno, Czech Republic, EU |
| A Fuzzy Logic Approach for Optimal Control of Continuous Casting Process |
| Co-authors: ŠANDERA Čeněk, ŠTĚTINA Josef & MASARIK Miloš |
| 225. |
MAZANCOVÁ Eva |
VSB - Technical University, Ostrava, Czech Republic, EU |
| Analysis of Selected High Manganese Steels Parameters - POSTER |
| Co-authors: SCHINDLER Ivo & CAGALA Michal |
| 226. |
MAZANCOVÁ Eva |
VSB - Technical University, Ostrava, Czech Republic, EU |
| Influence of Ageing Processes on Strengthening of Three TRIPLEX Steel Types - POSTER |
| Co-authors: RUŽIAK Ivan, JONŠTA Petr & VYLEŽÍK Michal |
| 227. |
MAZANCOVÁ Eva |
VŠB - Technical University, Ostrava, Czech Republic, EU |
| Selected Properties of Mines Supports - POSTER |
| Co-authors: HOLEŠINSKÝ Jan & VAŠEK Zdeněk |
| 228. |
MAZANCOVÁ Eva |
VSB - Technical University, Ostrava, Czech Republic, EU |
| Hydrogen Induced Cracking of Ti Clad to the 304 SS in Annealed State |
| Co-authors: OSTROUSHKO Dmytro |
| 229. |
MELCIOIU Georgiana |
Politehnica University of Timisoara, Timisoara, Romania, EU |
| Determining Properties of Alloys of Ni-Sn-Cu-P in the Form of Ribbons Used for Soldering Electronic Components |
| Co-authors: SERBAN Viorel Aurel, CODREAN Cosmin, LOCOVEI Cosmin & CORNEA Florin Marian |
| 230. |
MENUSHENKOV Vladimir |
MISiS, Moscow, Russian Federation |
| The Effect of Heat Treatment on the Crystal Structure and Magnetic Properties of Melt Spun Fe3B-Based Alloys - POSTER |
| Co-authors: SAVCEHNKO Elena, SVIRIDIVA Tatiana, SAVCHENKO Aleksander |
| 231. |
MENUSHENKOV Vladimir |
MISiS, Moscow, Russian Federation |
| Effect of Dy Addition and Heat Treatment Conditions on the Magnetic Properties of (Nd,Dy)-Fe-B-Based Sintered Magnets |
| Co-authors: SAVCHENKO Aleksander, KURSA Miroslav & DRÁPALA Jaromir |
| 232. |
MENUSHENKOV Vladimir |
MISiS, Moscow, Russian Federation |
| Effect of High Energy Milling and Subsequent Annealing on the Phase Composition and Magnetic Properties of Nanocrystalline Nd9.5Fe84B6Cu0.5 Alloy - POSTER |
| Co-authors: VIDMANOV Ilia, BORDYUZHIN Igor, SAVCHENKO Aleksander, POLIKUTKINA Svetlana, SZHUKOV Dmitrii & DINISLAMOVA Elina |
| 233. |
MESSAOUDI Salim |
University de Biskra, Biskra, Algeria |
| Deformation Texture in Wire Drawn Copper - POSTER |
| Co-authors: ZIDANI Mosbah, BUADIN Thierry, DERFOUF Chems Eddine, BOULAGROUN Abdelmalek & MATHON Marie Hélène |
| 234. |
MHADHBI Mohsen |
National Institute of Research and Physicochemical Analysis , Tunis, Tunisia |
| Influence of Heat Treatments on the Structure of FeAl Powders Mixture Obtained by Mechanical Alloying - POSTER |
| Co-authors: KHITOUNI M., ESCODA L. & SUÑOL J. J. |
| 235. |
MICHALCOVÁ Alena |
ICT Prague, Praha, Czech Republic, EU |
| Description of Reaction Mechanism during Reactive Sintering Process of Al-Fe-Si-Ni Alloys |
| Co-authors: NOVÁK Pavel, SAKSL Karel, VOJTĚCH Dalibor, MAREK Ivo, BEDNARČÍK Josef & ZIKMUND Petr |
| 236. |
MICHLOWICZ Edward |
AGH University of Science and Technology, Krakow, Poland, EU |
| Capital Stream Flow Modeling in a Steel Mill Waste Management System |
| Co-authors: ZWOLINSKA Bozena |
| 237. |
MIKMEKOVÁ Eliška |
ISI AS CR, v.v.i., Brno, Czech Republic, EU |
| Observation of Residual Stress in Thin Films by SLEEM |
| Co-authors: MÜLLEROVÁ Ilona, SOBOTA Jaroslav, PATÁK Aleš, CAHA Ondřej |
| 238. |
MIKMEKOVÁ Šárka |
ISI AS CR, v.v.i., Brno, Czech Republic, EU |
| Study of metals and alloys by SLEEM - POSTER |
| Co-authors: MÜLLEROVÁ Ilona, MIKMEKOVÁ Eliška & FRANK Luděk |
| 239. |
MÍŠKOVÁ Jana |
COMTES FHT a.s., Dobřany, Czech Republic, EU |
| Structural Analysis of X2CrNiMoN22-5-3 Duplex Steel Ingot - POSTER |
| Co-authors: MARTÍNEK Petr & DLOUHÝ Jaromír |
| 240. |
MOHYLA Petr |
Flash Steel Power, a.s., Ostrava, Czech Republic, EU |
| Creep Properties of Base Material and Welded Joint of Steel P92 |
| Co-authors: ŽVAKOVÁ Naděžda, ZAPLETAL Jiří & KUBOŇ Zdeněk |
| 241. |
MRŇA Libor |
Brno University of Technology, Brno, Czech Republic, EU |
| Manufacturing of Solar Absorber by Unconventional Methods |
| Co-authors: LIDMILA Zdeněk, PODANÝ Kamil, FOREJT Milan & KUBÍČEK Jaroslav |
| 242. |
NABIL Bensaid |
National Center for Welding and Control Research, Algiers , Algeria |
| Influence of Welding Parameters on the Evolution of the Microstructure of Ferritic Stainless Steel Welds (AISI 430) - POSTER |
| Co-authors: TALA-IGHIL N., BADJI R., HADJI M. & OUALLAM S. |
| 243. |
NAIZABEKOV Abdrakhman |
Karaganda state industrial university, Temirtau, Kazakhstan |
| Forming of Microstructure of the Al-Si-Fe-Mn System Alloy by Equal Channel Angular Pressing with Backpressure |
| Co-authors: ANDREYACHSHENKO Violetta & KLIBER Jiri |
| 244. |
NAMIN Reza Parastar |
Tehran Polytechnic (Amirkabir University of technology), Vancouver, Canada |
| Modeling and prediction of impact behavior of functionally graded steel composites |
| Co-authors: NAEIMI Mohammad & ZAMANI Seyed Mohammad Mahdi |
| 245. |
NOSKIEVIČOVÁ Darja |
VSB - Technical University, Ostrava, Czech Republic, EU |
| Analysis of Nonrandom Patterns in Control Charts and its Software Support |
| 246. |
NOVÁK Pavel |
ICT in Prague, Praha, Czech Republic, EU |
| Formation of Intermetalllics during Reactive Sintering Production of Fe-Al Alloys |
| Co-authors: MICHALCOVÁ Alena, MAREK Ivo, BEDNARČÍK Jozef & SAKSL Karel |
| 247. |
NOVÁK Pavel |
ICT in Prague, Praha, Czech Republic, EU |
| Surface Treatment of Fe-Al Alloy |
| Co-authors: FILIP Vladimír & MICHALCOVÁ Alena |
| 248. |
OANCA Octavian |
"Politehnica" University of Timisoara, TIMISOARA, Romania, EU |
| Horn Failure Analysis from Titan Alloy Used in Ultrasonic Cavitational Process - POSTER |
| Co-authors: PASCA Niculai, BORDEASU Ilare & MITELEA Ion |
| 249. |
OBRTLÍK Karel |
IPM AV ČR, v.v.i., Brno, Czech Republic, EU |
| Effect of Plasma Spreyed AlSi Coating on Low Cycle Fatigue Properties of Cast Superalloy Inconel 738LC |
| Co-authors: POSPÍŠILOVÁ Simona, JULIŠ Martin, ČELKO Ladislav& PODRÁBSKÝ Tomáš |
| 250. |
OPIELA Marek |
POLITECHNIKA ŚLĄSKA, Gliwice, Poland, EU |
| Influence of Plastic Deformation Conditions on Recrystallization Kinetics of Nb-Ti-V Microalloyed Steel - POSTER |
| Co-authors: GRAJCAR Adam |
| 251. |
OSTAPOVETS Andriy |
IoP AS CR, v. v. i., Praha, Czech Republic, EU |
| Analysis of Near-Coincidence Site Lattice Boundary Frequency in Mg-3Al-1Zn Magnesium alloy |
| Co-authors: MOLNÁR Peter, JÄGER Aleš & LEJČEK Pavel |
| 252. |
OSTROWSKA-POPIELSKA Patrycja |
Institute or Iron Metallurgy, Gliwice, Poland, EU |
| Technologies for Managing of Steelmaking Dust |
| Co-authors: SOREK Agata |
| 253. |
PANIC Bogdan |
Politechnika Śląska, Gliwice, Poland, EU |
| Model Investigations of Bed Particles Distribution in Shaft Furnaces - POSTER |
| 254. |
PARILÁK Ľudovít |
ŽP VVC,s.r.o., Podbrezová, Slovakia, EU |
| Structural basis of steel grade P460N |
| Co-authors: DOMOVCOVÁ Lucia, ĎURČÍK Roman & BEVILAQUA Tomáš |
| 255. |
PARK Jaesin |
Research Institute of Industrial Science and Technology, Pohang, Korea, Republic of |
| Workability of Wide Strip Cast AZ31 Magnesium Alloy |
| Co-authors: YUN Kiho, KIM Deok, KIM Jae Joong, PARK Woo-jin, CHOO Dongkyun, DUCK Oh & KWONn |
| 256. |
PARK JiEon |
POSCO, Pohang, Korea, Republic of |
| Effect of Heat Treatment on a Ridging Phenomenon of Ferritic Stainless Steels |
| Co-authors: PARK SooHo |
| 257. |
PAVLAS Roman |
VSB - Technical University, Ostrava, Czech Republic, EU |
| Quality Control of the Manufacturing Process Using SPC Method |
| Co-authors: JANČÍK Ladislav |
| 258. |
PERIANU Ion Aurel |
Politehnica "University"of Timisoara, Timisoara, Romania, EU |
| Optimizing Abrasive Waterjet Cutting for Special Materials. Case Study: Cutting Austenitic Stainless Steels - POSTER |
| Co-authors: BIRDEANU Valentin, MITELEA Ion |
| 259. |
PERNIS Rudolf |
University of Alexander Dubcek in Trencin, Trencin, Slovakia, EU |
| Theoretical Calculation of the Minimum of Rolling Pressure |
| Co-authors: KASALA Jozef |
| 260. |
PETRENEC Martin |
IPM AS CR, v. v. i., Brno, Czech Republic, EU |
| Microstructure characterization and fatigue behavior of beta phase containing gamma TiAl alloy |
| Co-authors: BERAN Přemysl, ŠMÍD Miroslav, CHLUPOVA Alice, KUBĚNOVA Monika |
| 261. |
PIEPRZYCA Jacek |
Politechnika Slaska, Katowice, Poland, EU |
| Construction of a RH Device's Physical Model - POSTER |
| Co-authors: MERDER Tomasz & JANISZEWSKIi Krystian |
| 262. |
PIETRZYK Maciej |
Akademia Gorniczo-Hutnicza, Krakow, Poland, EU |
| Mulitscale and Meta Modeling - From High Accuracy to High Efficiency in Simulations of Metal Forming Processes - INVITED LECTURE |
| Co-authors: SZELIGA Danuta |
| 263. |
PODANÝ Pavel |
COMTES FHT Inc., Dobřany, Czech Republic, EU |
| Dealing with Technological Problems during the Production of Thin Foils from Special Alloys |
| Co-authors: KOUKOLÍKOVÁ Martina, ZEMKO Michal & TUČEK Jaroslav |
| 264. |
PODJUKLOVÁ Jitka |
VSB - Technical University, Ostrava, Czech Republic, EU |
| Properties of Glass-ceramic Enamel Coats and Their Used in Biological Environment |
| Co-authors: BÁRTEK Vratislav, LANÍK Tomáš, HRABOVSKÁ Kamila, KOPAŇÁKOVÁ Sylvie, ŠRUBAŘ Petr & SUCHÁNKOVÁ Kateřina |
| 265. |
POHLUDKA Martin |
VSB - Technical University, Ostrava, Czech Republic, EU |
| Porosity of Ni3Al-Based Alloys Prepared by Gravity and Centrifugal Casting - POSTER |
| Co-authors: ČEGAN Tomáš, MALCHARCZIKOVÁ Jitka, KAŇÁK David & FRIDRICH René |
| 266. |
POKLUDA Jaroslav |
UT, Brno, Brno, Czech Republic, EU |
| Cyclic Oxidation Behaviour and Microstructure of Nickel-Based Superalloys IN 713 LC and IN 792-5A with Diffusion Coatings |
| Co-authors: KIANICOVÁ Marta |
| 267. |
POKORNÝ Petr |
ICT in Prague, Praha, Czech Republic, EU |
| Testing Bond Strenght Galvanized Steel Reinforcement Concrete with Verification Causes Changes at the Interface of both Materials - POSTER |
| Co-authors: KOUŘIL Milan & NOVÁK Pavel |
| 268. |
POKORNÝ Petr |
ICT in Prague, Praha, Czech Republic, EU |
| An Objective Assessment of Change in Porosity of the Concrete Stone from the Phase Interface Hot-Dip Galvanized Steel/Concrete and Carbon Steel/Concrete - POSTER |
| Co-authors: SEDLÁŘOVÁ Ivona & MICHALCOVÁ Alena |
| 269. |
POKOVÁ Michaela |
Charles University in Prague, Praha, Czech Republic, EU |
| The influence of pre-deformation on minor phases precipitation in modified EN AW-3003 aluminium alloys |
| Co-authors: CIESLAR Miroslav, LACAZE Jacques |
| 270. |
POLÁCHOVÁ Daniela |
UJP PRAHA a.s., Praha, Czech Republic, EU |
| Comparison of Hardness, Tensile Stress and Yield Stress, Depending on Temperature and Annealing Time of Degradation of P91 Steel - POSTER |
| Co-authors: HORVÁTH Ladislav, HÁJKOVÁ Pavlína & UZEL Josef |
| 271. |
POLAT Seyda |
Kocaeli University, Kocaeli, Turkey |
| A Microstructural Study on CuSn10 Bronze Produced by Sand and Investment Casting Techniques - POSTER |
| Co-authors: TASLICUKUR Z., ALTUG G. S., ATAPAKE S. H. & TUREDI E. |
| 272. |
POMYKALSKI Przemysław |
Technical University of Lodz, Lodz, Poland, EU |
| Consequences of economic downturn on financial standing of basic metals manufacturing companies in Poland |
| 273. |
POPELA Tomáš |
ICT in Prague, Praha, Czech Republic, EU |
| Preparation and Properties of Boride Layers on TiAl Intermetallics - POSTER |
| Co-authors: VOJTĚCH Dalibor |
| 274. |
POPESCU Mihaela |
Politehnica University of Timisoara, Timisoara, Romania, EU |
| Problems Posed by the Design and Implementation of a Welded Petrochemical Storage Tank - POSTER |
| Co-authors: ROŞU Radu Alexandru, CUTEAN Simona & BOBINĂ Marian |
| 275. |
POTECASU Florentina |
University “Dunarea de Jos” of Galati, Galati, Romania, EU |
| Surface Treatment of Iron-Based Sintered Compacts for Corrosion Protection |
| Co-authors: RADU Tamara, MARIN Mihaela & CIOCAN Anisoara |
| 276. |
POURKHORSHIDI Sajjad |
Tehran Polytechnic (Amirkabir University of technology), Vancouver, Canada |
| Manufacturing and Evaluating of Cu-based Shape Memory Alloys by Hot Extrusion of PM Samples Made by Mechanical Alloying Process |
| Co-authors: NAEIMI Mohammad, PARVIN Nader, ZAMANI Seyed Mohammad Mahdi & EBRAHIMNIA Hamid |
| 277. |
PRŮŠA Filip |
ICT in Prague, Praha, Czech Republic, EU |
| Microstructure and Properties of Rapid Solidified Al-Si-Fe and Al-Si-Fe-Cr Alloys Prepared by Centrifugal Atomization - POSTER |
| Co-authors: VOJTĚCH Dalibor |
| 278. |
PUSTĚJOVSKÁ Pavlína |
VSB - Technical University, Ostrava, Czech Republic, EU |
| Technical-economic prospects of utilization of alternative ironmaking techniques in metallurgy |
| Co-authors: JURSOVÁ Simona & BROŽOVÁ Silvie |
| 279. |
RAAB Zdeněk |
University of West Bohemia in Plzen, Plzeň, Czech Republic, EU |
| Numerical Simulation of Cross Roll Straightening Processes - POSTER |
| Co-authors: HYNEK Martin |
| 280. |
RADEV Rossen |
University of Ruse, Ruse, Bulgaria, EU |
| Flow Curves of Al 7075 Alloy Processed by Equal Channel Angular Pressing - POSTER |
| Co-authors: GAGOV Valentin, GOSPODINOV Danail, YANKOV Emil & STANOEVA Marieta |
| 281. |
RADU Tamara |
University “Dunarea de Jos” of Galati, Galati, Romania, EU |
| Obtaining and Characterizing Zn-Al-Bi Coatings on Steel Band |
| Co-authors: POTECASU Florentina, CIOCAN Anisoara & BALINT Lucica |
| 282. |
RAPOUCH Jiří |
ICT in Prague, Praha, Czech Republic, EU |
| Detection of Structural Changes in Heat-Resistant Steels after Heat and Creep Strain Using Electrochemical Methods |
| Co-authors: BYSTRIANSKÝ Jaroslav & SVOBODOVÁ Marie |
| 283. |
RAUDENSKÝ Miroslav |
Brno University of Technology, Brno, Czech Republic, EU |
| Minimization of Thermal Cracks of Rolls by Cooling Optimization |
| Co-authors: ZAHRADNÍK Radek |
| 284. |
REVAUD Meriadeg |
MINES ParisTech, Evry, France, EU |
| Microstructural Study of the Intergranular Precipitation in ATI 718Plus Superalloy - POSTER |
| Co-authors: NAZÉ Loïc |
| 285. |
ROSYPALOVÁ Silvie |
VSB - Technical University, Ostrava, Czech Republic, EU |
| Influence of SiO2 on Interfacial Tension between Oxidic System and Steel |
| Co-authors: DUDEK Rostislav & DOBROVSKÁ Jana |
| 286. |
ROUČKA Jaromír |
Brno Technical University , Brno, Czech Republic, EU |
| Control of Solidification Process and Microstructure of Inconel Alloys and their Prediction by Means of Numerical Simulation |
| Co-authors: ODLOŽIL Jan, KOVÁČ Marek, KRUTIŠ Vladimír & HRBÁČEK Karel |
| 287. |
RUSZ Stanislav |
VSB - Technical University, Ostrava, Czech Republic, EU |
| The Structure Refining of the AZ31 Alloy by Process Severe Plastic Deformation - POSTER |
| Co-authors: HADASIK Eugeniusz, ČÍŽEK Lubomír, DUTKIEWICZ Jan, DONIČ Tibor, KEDROŇ Jan, TYLŠAR Stanislav & Michal Salajka |
| 288. |
RUSZ Stanislav |
VSB - Technical University, Ostrava, Czech Republic, EU |
| The Forming of Strip Sheet of Low Carbon Steel by DRECE Process (Dual Rolls Equal Channel Extrusion) |
| Co-authors: MICHENKA Vít, ČÍŽEK Lubomír, DONIČ Tibor, SALAJKA Michal, TYLŠAR Stanislav & KEDROŇ Jan |
| 289. |
RUŽIAK Ivan |
VSB - Technical University, Ostrava, Czech Republic, EU |
| The Influence of Mn Steels Ageing on Heat Transfer Phenomena |
| Co-authors: MAZANCOVÁ Eva, KOŠTIAL Pavol, GAJTANSKÁ Milada & KRIŠŤÁK Ľuboš |
| 290. |
ŘIČÁNKOVÁ Veronika |
Brno University of Technology, Brno, Czech Republic, EU |
| Microstructural Changes of Air Plasma Sprayed CoNiCrAlY Coatings After Remelting |
| Co-authors: ČELKO Ladislav, KLAKURKOVÁ Lenka & ŠVEJCAR Jiří |
| 291. |
SAFANAMA Dorsa Sadat |
Amirkabir University of Technology, Tehran, Iran, Islamic Republic of |
| Effect of Welding Current on Mechanical Properties of Martensitic Advanced High Strength Steel Spot Welds - POSTER |
| Co-authors: MARASHI Pirooz, POURANVARI Majid, KHANI Milad & SHOJAIE Sina |
| 292. |
SAMEK Ludovic |
Voestalpine Stahl GmbH , Linz, Austria, EU |
| High Manganese Steel for Cold-Rolled Applications: Material Properties, Processing and Potential Applications |
| Co-authors: ARENHOLZ Enno |
| 293. |
SAMEK Ludovic |
Voestalpine Stahl GmbH, Linz, Austria, EU |
| Influence of the Thermal Processing on the Microstructure and Mechanical Properties of a High-Performance High-Manganese Steel |
| Co-authors: ARENHOLZ Enno, SCHNEIDER Reinhold & GENTIL Johannes |
| 294. |
SAMEK Ludovic |
Voestalpine Stahl GmbH, Linz, Austria, EU |
| Steel - Material of Choice for Automotive Lightweight Applications |
| Co-authors: KRIZAN Daniel |
| 295. |
SAMOLEJOVÁ Andrea |
VŠB - Technical University, Ostrava, Czech Republic, EU |
| Employee Motivation to Product and Process Improvement in Czech Metallurgical Companies - POSTER |
| Co-authors: LAMPA Martin & BESTA Petr |
| 296. |
SANIUK Sebastian |
University of Zielona Góra, Zielona Góra, Poland, EU |
| Prototyping of Production Networks in Regional Metallurgical Cluster |
| Co-authors: SANIUK Anna |
| 297. |
SAVKOVÁ Jarmila |
University of West Bohemia in Plzen, Plzeň, Czech Republic, EU |
| Tribological Properties of TiAlSIN Coatings for Forming Processes - POSTER |
| Co-authors: BLÁHOVÁ Olga |
| 298. |
SAVKOVÁ Jarmila |
University of West Bohemia in Plzen, Plzeň, Czech Republic, EU |
| High Temperature Sliding Behaviour of TiC-based Thermally Sprayed Coating - POSTER |
| Co-authors: KAŠPAROVÁ Michaela & HOUDKOVÁ Šárka |
| 299. |
SEBZDA Wojciech |
Politechnika Śląska, Gliwice, Poland, EU |
| The Evaluation of Cast Steel Filtration Efficiency |
| Co-authors: BARTOCHA Dariusz, SUCHOŃ Jacek & BARON Czesław |
| 300. |
SHMELEVA Nadezhda |
National University of Science, Moscow, Russian Federation |
| Forming the System of Sustainable Development Indicators for Metallurgical Enterprises |
| 301. |
SCHINDLER Ivo |
VSB - Technical University, Ostrava, Czech Republic, EU |
| Phenomenological Model of Hot Deformation Resistance of the C-Mn-V-B-Type HSLA Steel |
| Co-authors: RUSH Stanislav, KAWULOK Petr, PLURA Jiří, VAŠEK Zdeněk & PACHLOPNÍK Radim |
| 302. |
SCHUBERT Jan |
Research and Testing Institute Plzen, Plzeň, Czech Republic, EU |
| Effect of Co Content on the Properties of HVOF Sprayed Coatings Based on Tungsten Carbide - POSTER |
| Co-authors: HOUDKOVÁ Šárka & KAŠPAROVÁ Michaela |
| 303. |
SCHWARZ Zdeněk |
ComTax Advising Ltd., Fryčovice, Czech Republic, EU |
| The Methodical Problems Associated with the Using of Accounting Information for the Financial Analysis of the Metallurgical Company |
| Co-authors: BUCHTOVÁ Jana & BERANOVÁ Petra |
| 304. |
SIDOROV Evgeny |
Vladimir State University, Vladimir, Russian Federation |
| Macro- and Microstructure Formation in the Liquid-Solid Region of Solid Solution Alloys, with Eutectic, Peritectic and Monotectic Transformations at Equilibrium and Non-Equilibrium Crystallization |
| Co-authors: PIKUNOV M.V. & DRÁPALA J. |
| 305. |
SIDOROV Evgeny |
Vladimir State University, Vladimir, Russian Federation |
| On the Configuration of the Au - Ag - Cu System Phase Diagram - POSTER |
| Co-authors: SAKULINA A.V. & VIKHAREV S.O. |
| 306. |
SIDOROV Evgeny |
Vladimir State University, Vladimir, Russian Federation |
| Manufacture of Aluminium Bronze Ingots by Continuous and Semi-Continuous Casting Methods - POSTER |
| Co-authors: VIKHAREV S.O. & SAKULINA A.V. |
| 307. |
SIEGL Jan |
CTU in Prague, Praha 1, Czech Republic, EU |
| Comparison of Mechanical Properties and Fracture Behaviour of Co-base and Ni-base Alloys |
| Co-authors: PODHORNÁ Božena, KUCHAŘOVÁ Květa & HRBÁČEK Karel |
| 308. |
SIKOROVÁ Andrea |
VSB - Technical University, Ostrava, Czech Republic, EU |
| Increase of competiveness of metallurgical companies by means of OPPI funds - POSTER |
| Co-authors: MYNÁŘ Martin & WICHER Pavel |
| 309. |
SÍS Jiří |
SVÚM a.s., Praha, Czech Republic, EU |
| The Sensitivity of 42SiCr Steel to Inclusions under Fatigue Loading for Three Different Ways of Heat Treatment |
| Co-authors: ČERNÝ Ivo & MIKULOVÁ Dagmar |
| 310. |
SKOTNICOVÁ Kateřina |
VSB - Technical University, Ostrava-Poruba, Czech Republic, EU |
| Structure and Selected Corrosion Properties of Alloy Ni45Mn39Sn11Co5 - POSTER |
| Co-authors: LASEK Stanislav, KOCICH Radim & KURSA Miroslav |
| 311. |
SKOUMALOVÁ Zuzana |
Nuclear Research Instute Rez, Řež, Czech Republic, EU |
| Corrosion Resistance and Compatibility of Eurofer Steel Coatings in the Pb-Li at the Temperature of 550°C |
| Co-authors: ŠPLÍCHAL Karel, KOŠEK Lukáš & BURDA Jaroslav |
| 312. |
SLÁMA Peter |
COMTES FHT a.s., Dobřany, Czech Republic, EU |
| Influence of Heat Treatment on the Microstructure, Mechanical Properties and Thermal Conductivity of alloy CuNi3Si |
| Co-authors: MOTYČKA Petr |
| 313. |
SMETANA Bedřich |
VSB - Technical University, Ostrava, Czech Republic, EU |
| Possibilities of Heat Capacities Determination of Metallic Systems in the Frame of Laboratory of Thermal Analysis |
| Co-authors: ŽALUDOVÁ Monika, ZLÁ Simona, DOBROVSKÁ Jana, TKADLEČKOVÁ Markéta, KLUS Petr & ROSYPALOVÁ Silvie |
| 314. |
SMIRNOV Eugeny |
Donetsk National Technical University, Donetsk, Ukraine |
| The Investigation of the Uninterruptedly-Casted Billets of Small Cross-Section with the Shape Deffect «Rhomoidity» Deformation Process in Box Passes |
| Co-authors: MINAYEV Aleksandr, SNITKO Sergey & KRASENKO Sergey |
| 315. |
SOBOTKA Jiří |
Technical University of Liberec, Liberec, Czech Republic, EU |
| Stress State Influence on the Stress–strain Curves of Deep-drawing Material DC05 |
| Co-authors: SOLFRONK Pavel, DOUBEK Pavel & ZUZÁNEK Lukáš |
| 316. |
SOCHA Ladislav |
VSB - Technical University, Ostrava, Czech Republic, EU |
| Evaluation of Influence of Fluxing Agents for Slags and way of Desoxidation on Efficiency of Steel Desulphurization |
| Co-authors: BAŽAN Jiří, STYRNAL Petr, PILKA Václav, PIEGZA Zbygněv, MELECKÝ Jan, GRYC Karel & TKADLEČKOVÁ Markéta |
| 317. |
SOLFRONK Pavel |
Technical University of Liberec, Liberec, Czech Republic, EU |
| The Computational Model Influence on the Numerical Simulation Accuracy for Forming Alloy EN AW 5754 |
| Co-authors: SOBOTKA Jiří, KOLNEROVÁ Michaela & ZUZÁNEK Lukáš |
| 318. |
SOLOMONOV Konstantin |
Moscow State University of Railway Engineering (Voronezh branch), Voronezh, Russian Federation |
| Application DEFORM to Simulation of Plastic Deformation |
| Co-authors: SVIRIN Viktor |
| 319. |
SOŁEK Dariusz |
Med-Group, Zywiec, Poland, EU |
| Galvanic Coatings as One of the Ways of Anticorrosive and Antibacterial Protection |
| Co-authors: HAJDUGA Maciej, JĘDRZEJCZYK Dariusz, WĘGRZYNKIEWICZ Sylwia & HAJDUGA Maciej Błażej |
| 320. |
SPÁČIL Vojtěch |
VSB - Technical University, Ostrava, Czech Republic, EU |
| Potential Customer Typology for Entrance on Powdery Painting Market |
| 321. |
SPLÍTEK Roman |
University of West Bohemia in Plzen, Plzeň, Czech Republic, EU |
| Manufacturing Technologie for Coatings Based on FeCrAlY - POSTER |
| Co-authors: HOUDKOVÁ Šárka & KAŠPAROVÁ Michaela |
| 322. |
STANEKOVÁ Hana |
IMMM SAS, Bratislava, Slovakia, EU |
| Creep Damage Assessment in Intermetallic Ti-46Al-8Ta Alloy using High- Resolution Computed Tomography |
| Co-authors: LAPIN Juraj |
| 323. |
STANISŁAWSKI Robert |
Technical University of Lodz, Lodz, Poland, EU |
| Role of Innovativeness in the Development of the Metal & Machine SME Sector in Poland (on the authors’ own research) - POSTER |
| Co-authors: LISOWSKA Renata |
| 324. |
STEFANOVA Vladislava |
University of Chemical Technology and Metallurgy, Sofia, Bulgaria, EU |
| Selective Extraction of Cobalt from Nickel Sulphate Solutions by Cyanex 272 - POSTER |
| Co-authors: ILIEV P., LUCHEVA B. & TZONEVSKIi A. |
| 325. |
STRAŇAVOVÁ Maria |
VSB - Technical University, Ostrava, Czech Republic, EU |
| Increasing the Profitability of the Operation of Heating Furnaces Using Models and Data Mining Systems |
| Co-authors: HEGER Milan , ŠPIČKA Ivo, ZIMNÝ Ondřej & FRANZ Jiří |
| 326. |
STRÁNSKÝ Karel |
Brno University of Technology, Brno, Czech Republic, EU |
| Heterogenity of the Concast Steel Slab Tightly Before the breakout |
| Co-authors: KAVIČKA František, DOBROVSKÁ Jana, MASARIK Miloš, ŠTĚTINA Josef & SEKANINA Bohumil |
| 327. |
STRNADEL Bohumír |
VSB - Technical University, Ostrava, Czech Republic, EU |
| New Sources of Strength and Toughness of Materials for High Technological Applications Program 4 of RMTVC - INVITED LECTURE |
| 328. |
STŘÍLKOVÁ Lucie |
MATERIALS AND METALLURGICAL RESEARCH Ltd., Ostrava, Czech Republic, EU |
| Microstructural Investigation of ICDP Iron Designed for Working Layers of Composite Centrifugally Casted Rolls on Hot Rolling Mills - POSTER |
| Co-authors: VÁLEK Tomáš |
| 329. |
STUDNICKI Andrzej |
Politechnika Śląska, Gliwice, Poland, EU |
| Stereological Parameters of Carbides in Modified Wear Resistant Fe-C-Cr Alloys - POSTER |
| Co-authors: JEZIERSKI Jan |
| 330. |
SUCHÁNKOVÁ Kateřina |
VSB - Technical University, Ostrava, Czech Republic, EU |
| Study of Transparent Nanocoatings for Application to Materials of Metallurgical Production - POSTER |
| Co-authors: PODJUKLOVÁ Jitka, LANÍK Tomáš, BÁRTEK Vratislav, KOPAŇÁKOVÁ Sylvie, ŠRUBAŘ Petr, HRABOVSKÁ Kamila & HANÁK Miroslav |
| 331. |
SUCHODOLSKA Anna |
Politechnika Radomska, Radom, Poland, EU |
| Corporate Social Responsibility in Assessment of Consumers of Metallurgical Enterprises - POSTER |
| 332. |
SZELIGA Danuta |
AGH University of Science and Technology, Krakow, Poland, EU |
| Design of the Continuous Annealing Process for Multiphase Steel Strips |
| 333. |
SZURMAN Ivo |
VSB - Technical University, Ostrava, Czech Republic, EU |
| Thermomechanical Treatment of Ni-Ti-X Alloys |
| Co-authors: KURSA Miroslav |
| 334. |
ŠEDÁ Petra |
IoP AS CR, v. v. i., Praha, Czech Republic, EU |
| Influence of Crystal Orientation on Texture Evolution of Magnesium Single Crystals after ECAP Processing |
| Co-authors: JAGER Aleš & LEJČEK Pavel |
| 335. |
ŠEFL Václav |
ICT in Prague, Praha, Czech Republic, EU |
| Effect of Copper on Mechanical and Corrosion Properties of High-Alloyed Steels |
| Co-authors: BYSTRIANSKÝ Jaroslav |
| 336. |
ŠIMEČEK Jiří |
University of West Bohemia in Plzen, Plzeň, Czech Republic, EU |
| Examination of the Fatigue Resistance of D2 Steel, Depending on Surface Conditions - POSTER |
| Co-authors: KŘÍŽ Antonín |
| 337. |
ŠLÉGR Pavel |
University of Economics, Praha, Czech Republic, EU |
| Controlling Tools in the Light of Crisis and Securing of Business Financial Stability through Banking Instruments |
| Co-authors: SCHOLLEOVÁ Hana |
| 338. |
ŠPIČKA Ivo |
VSB - Technical University, Ostrava, Czech Republic, EU |
| Background of Reduction of Operating Costs of Continuous Reheating Furnaces |
| Co-authors: HEGER Milan, ZIMNÝ Ondřej & STRAŇAVOVÁ Maria |
| 339. |
ŠRUBAŘ Petr |
VSB - Technical University, Ostrava, Czech Republic, EU |
| Study of the Effects of Distribution Pigment Nanoparticles Corrosion Transparent Coating - POSTER |
| Co-authors: PODJUKLOVÁ Jitka, LANÍK Tomáš, BÁRTEK Vratislav, SUCHÁNKOVÁ Kateřina, KOPAŇAKOVÁ Sylvie, HRABOVSKÁ Kamila & DVORSKÝ Richard |
| 340. |
ŠTĚPÁN Petr |
VSB - Technical University, Ostrava, Czech Republic, EU |
| Effect of Heat Treatment on Properties of TiNb Based Alloys - POSTER |
| Co-authors: LOSERTOVÁ Monika |
| 341. |
ŠTĚTINA Josef |
Brno University of Technology, Brno, Czech Republic, EU |
| Optimization of Secondary Cooling in Order to Achieve Higher Surface Temperatures |
| Co-authors: KAVIČKA František, MAUDER Tomáš, KLIMEŠ Lubomír, MASARIK Miloš & ŠAŇA Zdeněk |
| 342. |
ŠUMŠAL Václav |
VSB - Technical University, Ostrava, Czech Republic, EU |
| Effect of Chemical Composition on the Hot Deformation Behavior of Selected Iron Aluminides |
| Co-authors: SCHINDLER Ivo, KOPEČEK Jaromír & ŠÍMA Vladimír |
| 343. |
ŠVANTNER Michal |
University of West Bohemia, Plzeň, Czech Republic, EU |
| Possibilities of Stainless Steel Laser Marking |
| Co-authors: KUČERA Martin & HOUDKOVÁ Šárka |
| 344. |
ŠVEC Martin |
Technical University in Liberec, Liberec, Czech Republic, EU |
| The effect of heat treatment on the structure of Nb and Cr doped Fe3Al alloy |
| Co-authors: VODIČKOVÁ V., HANUS P. |
| 345. |
ŠVEC Pavel |
VSB - Technical University, Ostrava, Czech Republic, EU |
| Diagnostics of Surface Defects such as Support Control in Steel Works |
| Co-authors: DAVID Jiří & FRISCHER Robert |
| 346. |
TIKAL Filip |
COMTES FHT Inc., Dobrany, Czech Republic, EU |
| Numerical Simulations of Effects of Furnace Lining Radiation on Batch of Various Ingots |
| Co-authors: DUCHEK Michal & BAROCH Ondřej |
| 347. |
TITTEL Viktor |
Technical University in Kosice, Košice, Slovakia, EU |
| Effect of drawing angle size of a die on wire drawing and bunching process |
| Co-authors: ZELENAY Miroslav & KUDELAS Lubos |
| 348. |
TKADLEČKOVÁ Markéta |
VSB - Technical University, Ostrava, Czech Republic, EU |
| Comparison of Numerical Results with Thermography Measurement |
| Co-authors: GRYC Karel, SOCHA Ladislav, MICHALEK Karel, KLUS Petr & MACHOVČÁK Pavel |
| 349. |
TOMA Cristian |
ISIM Timisoara, Timisoara, Romania, EU |
| CMT Joining of Aluminum and Magnesium Alloy in a Statistical Experiment - POSTER |
| Co-authors: CICALA E., SALLAMAND P. & GREVEY D. |
| 350. |
TOŠENOVSKÝ Josef |
VSB - Technical University, Ostrava, Czech Republic, EU |
| Application of Multivariate Loss Function for the Assessment of Quality of Technological Process Management |
| Co-authors: MONSPORTOVÁ Lenka & TOŠENOVSKÝ Filip |
| 351. |
TRAN Quang Dung |
University of Defence, Moravská Třebová, Czech Republic, EU |
| Properties of Hardened Layer of Drilled Deep Hole - POSTER |
| Co-authors: SVOBODA Emil, JOSKA Zdeněk, POKORNÝ Zdeněk & MAŇAS Karel |
| 352. |
TROFIMOV Evgeny |
South Ural State University, Chelyabinsk, Russian Federation |
| The Thermodynamic Analysis of the "Nonferrous Metal Melt - Conjugate Phases" Systems - POSTER |
| Co-authors: MIKHAILOV Gennady |
| 353. |
TURCZYN Stanislaw |
AGH University of Science and Technology, Krakow, Poland, EU |
| Rolling of Advanced High Strength Steels for Automotive Industry |
| Co-authors: DZIEDZIC Michal |
| 354. |
TURŇA Milan |
SUT in Trnava, FMST, Trnava, Slovakia, EU |
| Qualitative Analysis of Joint Boundary at (high-speed) Welding of Metals by Explosion |
| Co-authors: TURŇA Ľubomír & TURŇOVÁ Zuzana |
| 355. |
TURŇA Milan |
SUT in Trnava, FMST, Trnava, Slovakia, EU |
| Effect of Variable Pressure Field on Equilibrium State of Molten Metal with Bottom Heating and Situated in a Homogeneous Gravitation Field - POSTER |
| Co-authors: TURŇA Ľubomír & TURŇOVÁ Zuzana |
| 356. |
VÁLEK Tomáš |
Vítkovické slévárny s.r.o., Ostrava, Czech Republic, EU |
| The Control of Microstructure of ICDP Iron Using Thermal Analysis - POSTER |
| Co-authors: HAMPL Jiří |
| 357. |
VÁLEK Tomáš |
Vitkovicke slevarny Ltd., Ostrava, Czech Republic, EU |
| Production of Spheroidal Graphite Iron with Core Wired for Spun Cast Rolls with High Progresive Material ICDP and HSS of Working Layer |
| Co-authors: ŠIMON Petr & STŘILKOVÁ Lucie |
| 358. |
VÁŇOVÁ Petra |
VSB - Technical University, Ostrava, Czech Republic, EU |
| Study of Hydrogen Embrittlement of the TRIP 800 Steels by Means of Tensile Tests at Simultaneous Hydrogen Charging |
| Co-authors: SOJKA Jaroslav, KONEČNÁ Kateřina & WENGLORZOVÁ Andrea |
| 359. |
VÁŇOVÁ Petra |
VSB - Technical University, Ostrava, Czech Republic, EU |
| Effect of Heat Treatment on the Formation and Pickling of Scale Layers - POSTER |
| Co-authors: PĚNČÍK Roman, ČEMPEL David |
| 360. |
VASILACHE Violeta |
Stefan cel Mare University, Suceava, Romania, EU |
| Studies about Structure and Some Physical Properties of Nickel and Zinc-Nickel Alloy Layers Electrochemically Deposited - POSTER |
| Co-authors: POPA Catalin & VASILACHE Traian |
| 361. |
VÁVRA Jan |
University of Pardubice, Pardubice, Czech Republic, EU |
| Determination of Environmental Aspects in Metallurgical Industry |
| Co-authors: BEDNAŘÍKOVÁ Marie & MIKOLAJKOVÁ Markéta |
| 362. |
VESELÝ Jozef |
Charles University in Prague, Praha, Czech Republic, EU |
| Analysis of Slip Line Structures Investigated by AFM during In-Situ Deformation |
| Co-authors: CIESLAR Miroslav, BONNEVILLE Joël, COUPEAU Christophe & KOPEČEK Jaromír |
| 363. |
VIDOVÁ Helena |
STU in Trnava, FMT, Trnava, Slovakia, EU |
| Lean Principles Application in Business Logistics |
| Co-authors: BEDNÁR Roman & BELUSKÝ Martin |
| 364. |
VILAMOVÁ Šárka |
VSB - Technical University, Ostrava, Czech Republic, EU |
| New Trends in Terms of Management in the Conditions of Metallurgy Firms - POSTER |
| Co-authors: JANOVSKÁ Kamila, KOZEL Roman, VOZŇÁKOVÁ Iveta & ŠVECOVÁ Eva |
| 365. |
VITRY Véronique |
University of Mons, Mons, Belgium, EU |
| Initial Deposition of Electroless Nickel from Borohydride-Reduced Bath on Various Ferrous Alloys |
| Co-authors: SENS Adeline & DELAUNOIS Fabienne |
| 366. |
VLACH Martin |
Charles Univerisity in Prague, Praha, Czech Republic, EU |
| Response of Cold-Rolled Al-Mn-Sc-Zr Alloy to Isothermal and Isochronal Annealing |
| Co-authors: STULÍKOVÁ Ivana, SMOLA Bohumil, CÍSAŘOVÁ Hana, PLÁŠEK Jaromír, OČENÁŠEK Vladivoj, TANPRAYOON Dhritti & NEUBERT Volkmar |
| 367. |
VLASÁK Tomáš |
SVUM a.s., Praha, Czech Republic, EU |
| High Temperature Properties of a New Wrought Austenitic Steel - POSTER |
| Co-authors: HAKL J. & NOVÁK P. |
| 368. |
VLČEK Jozef |
VŠB - Technical University, Ostrava, Czech Republic, EU |
| Slags from production pig iron and steel making and ways of their processing |
| Co-authors: TOMKOVÁ Václava, OVČAČÍKOVÁ Hana, VOLKOVÁ Anežka, TOPINKOVÁ Michaela, MATĚJKA Vlastimil, OVČAČÍK Filip & MICHNOVÁ Michaela |
| 369. |
VLČKOVÁ Vladimíra |
University of Pardubice, Pardubice, Czech Republic, EU |
| Outsourcing and its Impact on Demand Planning |
| Co-authors: PATÁK Michal |
| 370. |
VODÁREK Vlastimil |
VSB - Technical University, Ostrava, Czech Republic, EU |
| Stability of Complex Nitrides in Heat Resistant Steels |
| 371. |
VOJTĚCH Dalibor |
ICT in Prague, Praha, Czech Republic, EU |
| Properties of the Casting AJ62 Mg-Based Alloy |
| Co-authors: KUBÁSEK Jiří & MARTÍNEK Michal |
| 372. |
VOLÁK Josef |
Research and Testing Institute Plzen, Plzeň, Czech Republic, EU |
| Determination of Fatigue Characteristics of Steel P92 - POSTER |
| Co-authors: CHOCHOLOUŠEK Michal, Matyáš NOVÁK |
| 373. |
VOLESKÝ Lukáš |
Technical University of Liberec, Liberec, Czech Republic, EU |
| Optimization of the Automated-Steel Heat Treatment - POSTER |
| Co-authors: KEJZLAR Pavel, ANDRŠOVÁ Zuzana |
| 374. |
VONTOROVÁ Jiřina |
VSB - Technical University, Ostrava, Czech Republic, EU |
| Influence of CMT and MIG Soldering on Zinc Layer Thickness - POSTER |
| Co-authors: MOHYLA Petr & ŠEVČÍKOVÁ Xenie |
| 375. |
VYTLACILOVA Vladimira |
CTU in Prague, Praha, Czech Republic, EU |
| Possible Use of the Crushed Slag Aggregate in Production of Fibre Reinfoced Concrete |
| Co-authors: RAINOVÁ Aneta & ŠEPS Karel |
| 376. |
WĘGRZYNKIEWICZ Sylwia |
BELOS PLP S.A., Bielsko- Biała , Poland, EU |
| Influence of the Zinc - Coatings Topography on the Adhesion Level |
| Co-authors: HAJDUGA Maciej, JĘDRZEJCZYK Dariusz & SOŁEK Dariusz |
| 377. |
WEISS Elżbieta |
University of Finance and Management, Warsaw, Poland, EU |
| Development and Strategic Decisions of Metallurgical Enterprises |
| 378. |
WICHER Pavel |
VSB - Technical University, Ostrava, Czech Republic, EU |
| Possible Applications of Resilience Concept in Metallurgical Supply Chains - POSTER |
| Co-authors: LENORT Radim & KRAUSOVÁ Emilie |
| 379. |
WITKOWSKI Krzysztof |
University of Zielona Gora, Zielona Góra, Poland, EU |
| Reverse Logistics Processes in Supply Chains in Metallurgy |
| Co-authors: GRACZYK Magdalena & BURCHART-KOROL Dorota |
| 380. |
WITKOWSKI Krzysztof |
University of Zielona Gora, Zielona Góra, Poland, EU |
| Map of Logistics Processes as a Part of Creating an Enterprise Supply Chain in the Metallurgical Company - POSTER |
| 381. |
WRÓBEL Tomasz |
Politechnika Śląska, Gliwice, Poland, EU |
| The Influence of Inoculation Type on Structure of Pure Aluminum |
| 382. |
YAHMI Youcef |
Welding and NDT scientific research Center, Cheraga Algiers , Algeria |
| Mechanical Properties and Microstructure of the CrMo Steel Steam Pipeline Welds after Long-Term Service - POSTER |
| Co-authors: MAAMACHE Bouzid & BELKESSA Brahim |
| 383. |
ZÁBRANSKÝ Tomáš |
Research and Testing Institute Plzen, Plzeň, Czech Republic, EU |
| Velocity Increase of Deposited Particles in Flame Spray Technology and Velocity Profile Optimization of Flame |
| 384. |
ZOBAČ Martin |
ISI AS CR, v.v.i., Brno, Czech Republic, EU |
| Small-Volume Reactive Metal Alloys Prepared by Electron Beam Melting - POSTER |
| Co-authors: VLČEK Ivan, ZOBAČOVÁ Jitka & DUPÁK Libor |
| 385. |
ZRNÍK Jozef |
COMTES FHT a.s. , Dobřany, Czech Republic, EU |
| Investigation of Gamma Prime Precipitate Morphology Development in Creep Exposed Nickel Base Superalloy |
| Co-authors: STRUNZ Pavel, MALDINY Mauricio, DAVYDOV Vladimir, KRAUS Libor |
| 386. |
ZUNA Petr |
CTU in Prague, Praha, Czech Republic, EU |
| Kinetics of Grain Growth and Recrystallization during Forming Modes for Processing of Steel SA 508 |
| Co-authors: HORNÍK Jakub, JANDOŠ František, Jaroslav Málek |
| 387. |
ŻYDEK Agata |
Czestochowa University of Technology, Czestochowa, Poland, EU |
| Microstructural Analysis of AM50+3%RE Magnesium Alloy in the As-Cast Condition and after Heat Treatment - POSTER |
| Co-authors: BRASZCZYŃSKA-MALIK Katarzyna |
| 388. |
ŽALUDOVÁ Monika |
VSB - Technical University, Ostrava, Czech Republic, EU |
| Study of DTA Method Experimental Conditions and their Influence on Obtained Data of Metallic Systems |
| Co-authors: SMETANA Bedřich, ZLÁ Simona, DOBROVSKÁ Jana, GRYC Karel, MICHALEK Karel & DUDEK Rostislav |
